STICKS - Imbued with ' Wizard's Worth ' 2 Sassafras Heartwood Wood SLABS Craft Woodworking Magic Wands Staff Scepter albidum

Sold by NaturesPickings
+ $10.00 shipping

Only 1 available

+ $10.00 shipping
In stock
Preparation takes 1-2 business days
Arrives from the United States

Made in Norvelt, Pennsylvania

Item details

These two craft wood slabs are split from a sassafras log ( sassafras albidum ) that I cut in February 2015.

The stave that these lengths came from has dried in my wood shop since then.

The lengths are approximately 22 1/4 inches. Primarily heartwood.

I use mostly hand tools in my shop. These are hand worked with a special tool to keep in accordance with " Wizard's Worth " imbuement standards.

" Wizard's Worth " imbuement - with regard to magic wand making - is described as follow's:

1. A sassafras tree that has had it's bark rubbed off - somewhat - sometime during it's life by the horn of a unicorn and sometime thereafter in it's life is shattered by lightning during a full moon storm.
Photo 5 shows that lightning shattered sassafras tree. It was hit by a lightning bolt about ten feet above where it was rubbed by a unicorn 15 years before.

2. A split piece of this trees heartwood, with some of the central core attached ( the pith ), is needed to imbue the wand material with Wizard's Worth.

3. The shattered heartwood material needs to be Shaved Smooth with a Sharpened Shard of a Sorcerer's Stone.

4. During the smoothing of the heartwood the person doing the smoothing must, unknowingly, recieve a splinter, of any size. It's okay to remove the splinter after it's discovered but it must have been 'unknowingly' received.

5. The imbuement ceremony is done at midnight of New Year's eve.

6. The imbuement ceremony and the potion are as follows:

1. Urine of a virgin doe unicorn. Amount does not matter but enough is needed to be able to fully submerge the wand material in the potion during the imbuement ceremony.
2. The right eye of a left handed red-spotted newt ( not easy to determine newt handedness ).
3. A pinch of powdered stone from any stone that had been entangled in the roots of the lightning shattered tree.
4. A short piece of unicorn horn to help in the submerging step.
5. The first three ingredients must be at a roiling boil at midnight.

It's alright to start boiling early but care must be taken to not boil away too much of the potion while waiting for the appropriate time to occur when it's time to fully submerge the wand material.

Continue boiling the potion.
As soon as a cloud fully covers the moon ( but only after midnight ) submerge the wand material totally using the left hand.

Use the short piece of the unicorn horn to help hold the wand material under the boiling potion so your hand is not injured.

I did all the hard parts as described. I may have had a beer or two during the imbuement ceremony, which I usually do anyway on New Year's Eve.
I believe that it is allowed.

The wand material must be 'finished' by the potential user to become a magic wand.

The finished length of the wand should be the "exact" same length as the prospective users forearm, that is, the length must be "exactly" the same as from the wrist bone's acme to the funny bone - 'exactly' at the spot where the funny OW! is caused - of the left arm.
Once the correct length is achieved it should work, assuming the red-spotted newt was left handed. That's one of the 'iffy' parts - the handedness of the newt.
The other 'iffy' part of course is the doe unicorn's chasteness.
Then there's the rubbed off bark. It may have been a buck rub rather than a unicorn rub.

The only way to know for sure is to make the magic wand to the exact right length and try a spell.

There is enough wood listed here to make several wands - of variable lengths - in case of length miscalculation.

Back in 1981 I sold some sassafras to a British lady named Lily that wanted to give it to her son Harry on his first birthday. We all know what happened to Harry.
Now that I'm thinking about it, I recall selling some larger sassafras with 'Wizard's Worth' , suitably lengthy to make a staff, to another person named Harry from Chicago back in '07'. Coincidence?

More 'Wizard's Worth' sassafras is available for custom orders.

No reviews yet

Shipping & policies
Preparation takes 1-2 business days
Arrives from the United States
Estimated Shipping
Shipping to
Zip or postal code

Shipping costs is something that can't be gotten away with. The carriers just do not deliver anything for free. If you see some item being sold with 'Free Shipping'
- it's not really !
Someone is paying it.
Either the item cost is higher or the seller is losing money.
Someone is paying that shipping.
That said, there is a way to save on shipping cost. That is to 'combine items' into one package. You can ask beforehand what the shipping will be for various orders. All I need is a zip code to figure it out.
Taking advantage of 'flat rate' boxes is another way.

Buying 'just one item' often results in the highest shipping cost. Packing that item with another can often totally eliminate a second item's shipping cost.
Ask me.

For example, a quart bag of wood shavings cost's $3.30 to send First Class.
If packed with 1 Lb. of wood splits, which is packed in a Flat Rate envelope with a mailing cost of $6.50, the quart of shavings can be included in that envelope AT NO COST.
That saves $3.30.
That is 'Free Shipping".
That is just one example. There are lot's of possibilities.
Ask me.

Best thing to do if contemplating a purchase of a few items is to contact me and ask for options to shipping charges and i'll try figuring alternatives. I can make a 'custom order'.
The worst that can happen to you is that you won't be agreeable to the prices. BUT, you could end up saving plenty of bucks. I saved one lady over $25.00 for a huge purchase of pine cones.

I use USPS for shipping.
First Class, Priority 'Flat Rate' and First Class Mail are preferred options for me - depending on item weight.
If the item shipping weight is 16 ounces or less more than likely it will go First Class.
Priority Mail has options of 'Flat Rate Priority' and just 'Priority Mail'. I'll use whichever is less.

If you prefer another shipping method contact me and let me know.

I do ship internationally - but only on request. Usually it will involve a 'custom order' because shipping cost will need to be figured out.

Questions can be addressed to:
silysavg [/at/]
My name is Mike


I accept several forms of payment in addition to online payments via Paypal and Amazon Payments.

I also accept Bitcoin through If you wish to use your bitcoin cyber-currency let me know.

I do not however accept personal checks.

If you prefer to send a payment in the mail, such as a Postal money order,
cashier's check, cash, unused U.S. Postage stamps, or silver coin (1964 or prior ),
please send to:
M. Sillett
111 Carnation Court
Mt. Pleasant, Pa. 15666

Let me know when you mail it so I can go to the Post Office and check it's arrival.

I am accepting 'Silver' coin at an exchange rate of .10 cents = $1.40 { 1 : 14 }.
A dime can you get you some good stuff. A quarter even better !

For 'Mail In' payments there is a deadline. You should be able to get the payment to me by 10 days.

For 'On-Line' payments payment should be completed by 3 days.

Returns & exchanges
I don't accept returns, exchanges, or cancellations
But please contact me if you have any problems with your order.
Additional return information
Refunds are not accepted unless I send you the incorrect item.
I describe honestly. I photograph honestly. I pack safely.

Additional policies


If you purchase a product from me I expect feedback - whatever is deserved / appropriate. Please do not try purchasing again, or ask for a Custom Order, if no prior feedback has been provided.

Q -- Do you mail orders on Saturday?

A -- Hardly ever.
I usually go away somewhere on weekends - starting Friday night.
Or, I'm out late Fridays - camping, fishing, etc and sleep in on Saturdays.

Q -- Your listings of meat smoking woods show many different ways that the wood was cut.
I see shavings, shards, splits, slivers and chunks and discs. The shards and splits look pretty much alike as do slivers and chunks. Can you explain the differences?

A -- Slivers are chunks that are sliced a few times to make more pieces of wood from a chunk. Where a chunk provides 1 small piece of wood to the smoking fire, that same chunk when sliced into slivers, provides 2 to 4 slivers or more.
Some people like the convenience and control in the use of slivers for smaller smokers.

Shards and splits are almost the same except that shards are the result of a split that did not make it the full length of 8 1/4 inches, which is the length I like so I can pack a lot of splits neatly in the width of a medium size ' Flat Rate ' Priority Mail mailing box.
Shards, being various lengths short of 8 1/4 inches, just don't look as uniform.

Q -- I do not see sawdust for sale. Is that an option?

A -- It is sold 'by request' for custom orders, like shust is.
I do all my wood processing with hand tools. I do not have a big operation so there is not a lot of sawdust. I'm just an old guy that likes working with green wood. However, some times I will have extra sawdust or shust because I produced more than the custom order needed. In that case I'll list the extra for sale.

Q - Shust? What's that? I looked it up and could not find anything.

A - It is a fabricated word made up by me - silysavg.
Pronounced to sound like dust, it is a noun defined as the product of attempting to make 'shavings' from a seasoned piece of really hard wood - such as pear.
Instead of getting nice shavings you end up with such small shavings that they are almost in the ilk of sawdust. Hence, SH + UST - - - shust.
Using a shaving horse and a drawknife on well seasoned pear wood in trying to get shavings is frustrating. It's almost as hard as trying to cut shavings from a thick glass rod.
It's a P.I.T.A. ( pain in the - - - - a - - - - arm ).

Q - What is a Sprig?

A - Sprigs are the terminal ends to twigs. They are those little end pieces you see at the tip of a twig or attached to the side of a branch or twig. When the tree is in it's active growth phase during spring and summer the sprigs sprout and you will either see leaves or blossoms.
If leaves sprout then there are the makings of an additional twig that may grow up an become a limb.
If blossom sprout then there are the makings of a piece of fruit or two ( apples, peaches, etc. ).
Anyway, SPRIGS can be very high in nutrients for browsing animals such as chinchilla's, bunnies and deer.

Q -- Why do some listings differentiate between 'heartwood' and 'sapwood' ?

A -- First, some aficionados of 'smoking' beef, poultry, fish and pork have preferences. Some like to add some sapwood to their fires or make a blend of woods since the sapwood carries the majority of the flavors.
Second, in the processing of some of the wood if I observe a presence of powder post beetle larvae and/or their powdery tunnels I choose not to make any of the sapwood a part of the smoking wood I list.
Finally, if there is any infiltration of infection from fungi ( spalting ) it will be apparent in the sapwood during the debarking or shaving processes.
Spalted wood is wood that is dead, dying or stressed. Mostly it is dead or dying.
Some people are allergic to fungi.
Plus once the wood has been taken over by mushroom mycelium much of what made that wood a special flavor has probably been lost.

Q -- Why is almost all the smoking wood you sell ' no bark' ?

A -- My opinion is that the bark is the dirtiest part of the tree. It is the first protective layer and therefore at the forefront against all attackers. Be it pollution, dirty rain, insects, pooping birds and other animals, animal chewing and scenting ( peeing on or rubbing scent glands on ), insecticides, fungicides, herbicides, fertilizers, etc., etc.
Some bark harbors lichen growth on it's scaly surface. Some lichen is toxic.
Some bark also has mushroom mycelium growth intertwined in it's structure. You can't identify the mushroom species by it's mycelium. Some mushrooms are toxic.
I believe that all that crap is not good. Just my opinion.

The only thing worse than having 'bark on' for smoking meat is using 'orchard wood'.
All those chemicals used by orchards not only get in the bark but are taken up in the sapwood of the tree through it's roots.

Some of that stuff of course gets 'washed off' but just as much gets 'washed on'.
I don't know whats worse so I remove it - soon after I harvest the limb, branch or trunk.
Anyway, and also, I am after the wood for my woodworking projects so I have no use for bark.

Q -- Where do you get the wood that provides the listings for meat smoking?

A -- I have a little more than 7 acres of wooded hillside that has been left alone since 1965. It harbors a little of everything that tends to grow in western Pennsylvania.