customize your own disc cutter-------- flower + butterfly ,jewelry tools/

Sold by LadyHeart
$1,000.00
+ $35.00 shipping
$1,000.00
+ $35.00 shipping
In stock
Preparation takes 4-6 weeks
Arrives from China

Features
Handmade
Made in Beijing, China

Item details

Dear Customer please notice:
The price is virtual prices,orders, please contact us prior to our company offer you a price!

The payment We only accept bank transfer. Paid by paypal, the order will be cancel.

I WILL POST YOUR CUTTER PIC TO MY INSTAGRAM IF YOU WANT TO KEEP PRIVATE,PLEASE LET ME KNOW AT THE BEGINNING.

=====================================================
THE CUTTER CAN BE TOTALLY CUSTOM-MADE.
We draw the cutter design drawing base on buyer’s requirement via CAD software.
We provide the cutter final price and shipping fee.
We need the buyer double check the CAD file after every modification. The buyer should check the each shapes, each shape size and the layout.
If the final price is not ok, we can stop right here.we charge nothing .
If the CAD file is confirm ok, no where need modify, and the price is ok too,then please place an order.

OUR RESPONSIBILITY IS MAKE SURE THE CUTTER EXACTLY THE SAME AS THE CAD FILE.
THE BUYER’S RESPONSIBILITY IS MAKE SURE THE CAD FILE ARE EXACTLY THE SAME AS THE BUYER’S REQUIREMENT.

When the order is paid, it means the buyer ask for us to make the cutter exactly the same as the CAD file shown.

THE CUTTER TOLERANCE IS ±0.1mm. It means when we mark the size 10mm in the CAD file. The final size is between 9.9mm to 10.1mm. Every machine has tolerance, the tolerance can‘t be avoid.
When the order is paid, it means the buyer knows about the tolerance and accept the tolerance.

=====================================================
What we need to know to draw the CAD file: 
the shape,each shape size, and layout,and how thick and what kind of metal you will cut with.
we make the cutter design drawing by CAD software. Normally The pic of design drawing that we send to you to check is screen shot of CAD file. We call it “2D view”. The 2D view is bitmap, when zoom in, the line will looks jag.I sure you the CAD file doesn’t the same, it is smoothly.the CAD file is vector. But the ETSY can’t upload CAD file,so we just can send you the 2D view via ETSY. But we can send the CAD file to your email address if you need. you need prepare a software can read CAD file.

if you can draw your shape with graphic design software such as corelDRAW or illustrator that is the best. But PLEASE DOUBE CHECK THE SIZE AND EACH SHAPE SIZE OF THE CAD FILE THAT WE SEND TO YOU.BECAUSE WE FIND THE VECTOR CAN NOT 100% IMPORT TO THE CAD SOFTWARE,SOMETIME SHAPE WILL PRODUCE SLIGHT DEFORMATION.
if you can’t draw, it doesn’t matter. Just find a way to let us know what shape and size and layout you need. 

If the shape of the graph is important, please send me a pic to show me the exact the shape you need. you only need to provide width or length of each shape, which size is important to you, just provide it to me, don’t provide me both. we can use the width and the exact shape to define the length, And vice versa. Because when we copy the exact shape, we find when the width is the buyer provide, then the length must be different from the buyer provide.And vice versa. Because people can’t measure the size as accurate as CAD software.

If the size of the shape is important, please provide me the accurate width and the length. For standard shape, such like circle, just provide me radius or diameter. Oval provide me long axis,short axis. Rectangle provide me width and length.

For the shapes have corners,Like triangle,rectangle, IF YOU DON’T DEFINE THE INNER CORNER,WE WILL MAKE THE INNER CORNER 0.1MM. The inner corner mean how round the corner is. The 0.1mm mean we made the corner has very tiny rounded, so the corner won’t easy hart your finger.

Please consider the sheet metal size and shape you will cut with, if you have special requirement on the layout, for example, you need the shape 10mm away from the center of the cutter, please let me know at the beginning. Otherwise, we will define the layout for you. Also,You may give me a draft to show your other special requirement.

if you have many shapes,you want to put them into one cutter block, we can do that. but please consider this, when the cutter is big and heavy, it is not convenience for pick up and insert the metal each time.

=====================================================
Order time& delivery&inventory
Normally,It will take 4-6 weeks to make the cutter ready to ship. But sometimes it may delay. Mostly the reason is national holiday, or the schedule of the factory delay.Please understand we never mean to slow shipping. And always try our best to ship out your order as quick as we can.All the cutter are all custom-made and made to order,we do not have any inventory.
We delivery the order via EMS, you can track it on your national postal system.for USA,it is USPS.Normally it will take 5-10 workdays to arrive.if you doesn’t receive the packet on time.Please be patient.
The shop doesn’t take any responsible of the shipping delay factor that out of our control, such as the customs,the weather,the plane...etc...

Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility.
Please check with your country's customs office to determine what these additional costs will be prior to purchase/ delivery.

=====================================================
Introduction&protection:
The cutter hardness is 56-62HRC
The main material is Cr12mov, top quality die steel.
The hardness is high, means the cutter is crisp.soft metal like silver, under stress will bend. Hard metal like cutter, when it under over pressure it will broken.
please always be careful to use the cutter.
please don’t drop the cutter from high.
Don’t bump against cutter strongly.
Please put the cutter in dry air, the die steel is not stainless, it will rust.
If you use hammer when cutting, only can use BRASS HEAD hammer.And the cutter must at least 1KG=1000g. For the biger shape, you may need 3lb or 4lb brass hammer.
please always VERTICAL knock the punch.
Please Use Burlife on the cutting edges of the punches of each time.
We suggest you use press machine to help you to cut. Becasue press machine will give good protection of the cutter.
PLEASE CUT ONE PIECE THEN GET IT OUT OF THE CUTTER.NEVER NEVER DON’T KEEP MORE THAN ONE PIECE IN THE CUTTER.

In a word,The same use way and protection as swanstrom disc cutter. 
Youtube have many video to show how to use and protect the cutter. Please make sure you know about that then use the cutter.
Limited space, so I don’t write much about how to use and protection.
Please follow the instruction to avoid the possibility of damage.
If you have questions, feel free to ask me.

====================================================
the reason Why we don’t do the round edge punches:
the round top punch, only advantage is we can know which end of the punch we can knock.... But it only have one end can cut metal. the round top side, can't cut metal. 

if we don't do the round top of my punches, it mean both end of the punch all can cut metal. if one end broken, you can use another end to cut.. It means one my punch equal 2 piece of round top punch. this is reason one.

another reason is for those asymmetric shapes, for example, the curved heart. the tail of the heart is face left on the cutter.
as you know, the blanks cut by cutters, due to the metal character, one side of the balnks will have a little round edge. but the punch touch the metal side is totally flat.

If the shape on the cutter, the curved heart tail is face left.then the blanks with round edge the heart tail is face right.
if we do the round top punch, then from this shape, you only can cut the heart the tail face right.

if we don't do the round top punch :
my cutter can cut from both side, it means you can overturn the cutter to cut.

the curved heart. the tail of the heart is face left on the cutter. we call this front side of the cutter. you can get a round edge heart, the tail is face right.
turn over the cutter. you can see the curved heart. the tail of the heart is face right on the cutter. you can cut from this side, then you can get a round edge heart,the heart tail is face left.

it means,for those asymmetric shapes, you can get a pair of mirror balnks from one shape on the cutter.

that is the reason, we don't do the handle,just use flat screws.
that is the reason, we don’t do the round top punch.

=====================================================
You are welcome to contract me at any time
My ins:
https://www.instagram.com/aixx1223/
Email: 21472014 @ qq.com
Wechat: aixx1223



Reviews
No reviews yet

More from this seller

Shipping & policies
Preparation takes 4-6 weeks
Arrives from China
Estimated Shipping
Shipping to
Zip or postal code
Customs and import taxes
Buyers are responsible for any customs and import taxes that may apply. I'm not responsible for delays due to customs.

Payments
Secure options
Etsy Studio keeps your payment information secure. Etsy Studio shops never receive your credit card information.
Other options
Etsy Studio can't guarantee the security of these options. For details on how to pay with these methods, contact me.
  • Other Method

Returns & exchanges
I don't accept returns, exchanges, or cancellations
But please contact me if you have any problems with your order.