Diy Necklace Kit

(2)
$22.70
+ $2.50 shipping

Only 1 available

$22.70
+ $2.50 shipping
In stock
Preparation takes 1-2 business days
Arrives from the United States

Features
Handmade
Made in Honolulu, Hawaii

Item details

Diy Necklace Kit. Swarovski crystal and 35 Swarovski crystal pearls in an easy waterfall necklace kit. 20" to 22" long with 4mm antique silver chain plus a 3" waterfall drop from the top of the 9mm textured jump ring. This quality chain has a secret non-tarnish, non-toxic, lead-free finish by the manufacturer and cleans with a damp cloth. Silver plated lobster clasp connects easily to a 2" backdrop in 6mm textured silver chain with extra dangles. A year-round necklace for day or evening, casual or dressy. A gift for yourself, a gift for a friend. This really is an easy piece to make if a bit time consumng with Instructions below the listing on this page. $2.50 shipping and additional items ship free ~ usually the+ next business day.

For more Designer Jewelry Kits and Designer Beads you are invited to visit:
http://www.etsy.com/shop/JewelryKitsHawaii

YOUR KIT AND INSTRUCTIONS

PACKAGE #1 BASICS - see photo #3

2 Pieces of chain 7 and 1/2"
1 Sterling silver 8mm closed jumpring
2 Silvertone connector charms
2 Pearls 10mm
4 Silver plated 3mm rondelles (use 1 on each side of the10mm pearls)
6 Jumprings 4mm
2 Ballpins 20 ga.
2 Pieces of 6mm chain 2 links each

A. Wire wrap a 10mm pearl and close 1 end on the last link of one 7 and 1/2" chain
Close the loop on the other end of the pearl
Connect the closed loop on the pearl to the center hole in the charm connector with a
jumpring.

B. Put a jumpring between the center hole on the opposite end of the connector charm and 1 link
of 6mm chain. Close jumpring.

C. Put a 4mm jumpring bewtween the remaining 2nd link of 6mm chain and the 8mm jumpring.
Close the

D. Do the same on the other side of the necklace.


PACKAGE #2 See Photo #4 Waterfall

36 Links of chain
5 Amethyst crystal 6mm beads
5 Sterling silver beads 2mm
5 3mm jumprings
5 Headpins
3 4mm jumprings
1 Connector charm

AMETHYST CRYSTAL DROPS - Each amethyst crystal bead is put on a headpin followed by a closed 3mm jumpring slipped over the headpin and on top of the 6mm bead. Add a 2mm sterling silver bead and close the loop on a link of chain.
.

A. Wire wrap a crystal drop on the end of the chain. Cut the chain, leaving 15 links of chain.
Connect the chain to the center hole in the charm connector with a 4mm jumpring.

B. Wire wrap a crystal drop on the end of the chain. Wire wrap a second crystal drop to the left
side of the 4th llnk. Cut chain leaving 13 links of chain, counting from the bottom bead. Connect to the left hole in the charm connector next to the center hole with a 4mm jumpring. Connect so the 2nd crystal on the chain faces left.

C. Wire wrap a crystal drop on the end of the chain. Wire wrap a second crystal drop to the
right side of the 4th link. Cut chain leaving 8 links of chain. Connect to the right hole in the
charm connector next to the center hole with a 4mm jump ring. Connect so the 2nd crystal on
chain faces right.


PACKAGE #3 FLOWER CLUSTERS NEXT TO CHARM CONNECTORS

Packaged for each side: 6 pearls 4mm
6 pearls 6mm
4 amethyst glass flower petals
2 Sterling silver beads 2mm
2 3mm amethyst bicone
2 6mm amethyst round
3 ballpins (headpin with a ball on the end)
4 headpins

Lay necklace flat. Starting on the right side, on the 6mm link next to the charm connector.
Wire wrap onto the lower side of the link in this order, working right to left ~

A. 4mm pearl with 3mm rondelle on HEADPIN
B 6mm amethyst round with HEADPIN
C 4mm pearl with 3mm rondelle on HEADPIN
D. 6mm pearl - amethyst flower petal with 3mm rondelle on BALLPIN
E. 6mm pearl - amethyst flower petal with 3mm rondelle and 3mm amethyst bicone W

On the link next to the 9mm jumpring wire wrap onto the lower side
of the link a 4mm pearl with a HEADPIN. That side is done.

Repeat n the other side, working left to right.

PACKAGE #4 PENDANT 12mm sterling silver bail
10mm pearl
1 ballpin 20 ga.
1 sterling silver 3mm bead

A. Wire wrap the 10mm bead with the 3mm sterling silver bead with a small closed loop.

B. Open the bail slightly and slip it over the bottom of the 9mm jumpring
.
Slip the completed waterfalll onto the lower prong thru the center hole in the charm connector.
Check that that the shortest chain will be on the right hand side

Next, slip on the loop of the 10mm pearl. Cut the lower prong 1/16" and close the bail being careful to not mar the front the bail. Don't cut the prong before putting the elements on. When the necklace it totally done and hanging up, add glue to the elements on the prongs to keep the 10mm pearl from wandering.
glue on


PACKAGE #5 BEAD CLUSTER ABOVE BAil -

2 pearls 4mm
2 pearls 6mm
2 pearls 8mm
2 amethyst 6mm beads
2 amethyst flower petals
2 spacers 4mm silver plated
2 ballpins
6 headpns

To make 1 ~ Wire wrap one 6mm pearl, amethyst flower petal, silver plated spacer, and 3mm
amethyst bicone. close loop. Use the BALLPIN.

Wire wrap one 4mm pearl and one 8mm pearl on headpins and close loop.
Open the jumpring and put the beads on in this order~ 4mm, 8mm, and 6mm with petal.

Close the jumpring directly above the bail on the right side of the 9mm jumpring
WITH 4MM PEARL FACING DOWN.

Wire wrap 6mm amethyst round directly above on the 9mm jumpring with a headpin.
Repeat on the other side.

PACKAGE #6 FINISH THE ENDS OF YOUR NECKLACE See photo #5


1 lobster clasp
2 jumprngs 4mm
1 piece 6mm chain
3 headpins
1 pearl 6mm
2mm sterling silver bead

Connect lobster clasp on 1 end with a jumpring. On the other end connect the 6m extender
chain to the necklace chain with a jumpring. On the end of the extender chain wire wrap your
8mm pearl. On the lnk directly above wire a 4mm pearl on each side of the link.

CLEAN YOUR NECKLACE AND YOU ARE DONE!








A.



Reviews
Average review
(2)
Great jewelry kits and fast shipping!
Dec 31, 2014 by Jim Perkins
Oh my what a beautiful kit. You can't go wrong with one of jewelry kits Hawaii.
Nov 18, 2014 by Deb Hobrla

More from this seller

Shipping & policies
Preparation takes 1-2 business days
Arrives from the United States
Estimated Shipping
Shipping to
Zip or postal code

All items are mailed in a padded manila envelope and mailed first class through the United States Post Office. I will notify you by email when shipment is made. Orders under $50 are not shipped with a tracking number or insurance. International customers, please contact me regarding shipping rates.


Payments

Paypal, Credit Cards, Checks/money orders. Cancellations can be made anytime before I send an email notification that your order has been shipped.


Returns & exchanges

All items are guaranteed for quality. If for any reason an order does not meet your expectations, please return the complete order within 2 weeks, in its' original, unused condition for a full refund, plus $2.50 shipping in the USA, or an exchange, customizing, or shop credit.