Items, as usual, ready for shipping in 5-7 business days.
Shipped with priority postal service without international tracking.
Tracking shipping is offered only as optional.
Returns & exchanges
return is not allowed
HOW TO 1. breaklight decals application:
Step A Clean the area thoroughly with rubbing alcohol or soap and water. Do not use Windex or similar products because it will leave a residue behind that will prevent the sticker from adhering well.
Step B Prepare the sticker for application by firmly rubbing a squeegee or credit card across the clear transfer tape. This removes any air bubbles that may have formed and makes the sticker cling to the transfer tape.
Step C Peel the white paper backing off the sticker. If the sticker clings to the backing, slowly replace the paper backing and repeat Step B.
Step D Slowly lower the sticker onto the surface and rub it in place firmly with a fingers. For best results, wait some hours before moving to the next step.
Step E Slowly peel the clear transfer tape off at an angle. Be careful not to pull the sticker off the surface. If sticker pulls away from the surface repeat Step D.
*For best results do not apply a sticker in extreme hot or cold temperatures. Better if the adhesive is applied at room temperature (18-20C °), or lightly warm with a hairdryer to help the adhesive to adhere better to the irregular surface of the breaklight.