Commercial grade vinyl rated for 6+ years of outdoor use. Apply to clean dry surface.
How to apply the decal:
Step 1. Clean the area thoroughly with rubbing alcohol or soap and water. Do not use Windex or similar products because it will leave a residue behind that will prevent the sticker from adhering well.
Step 2. Prepare the sticker for application by firmly rubbing a squeegee or credit card across the transfer tape. This removes any air bubbles that may have formed and makes the sticker cling to the transfer tape.
Step 3. Peel the white paper backing off the sticker. If the sticker clings to the backing, slowly replace the paper backing and repeat Step 2.
Step 4. Slowly lower the sticker onto the surface and rub it in place firmly with a squeegee or credit card.
Step 5. Slowly peel the clear transfer tape off at an angle. Be careful not to pull the sticker off the surface. If sticker pulls away from the surface repeat Step 4. Air bubbles can be worked to the edge of the sticker, if not a pinhole will allow the air to bleed and become virtually invisible once the bubble is gone.