Stainless Steel Rivets, Double Cap Rivets, Rivets for Leather, Rivets for Biothane, Stainless Fasteners, Stainless Rivets, .35" Small

Sold by CollarsbyKitt
(7)
$15.00+
Get Shipping Estimate
$15.00
$25.00
$70.00
$15.00+
In stock
Preparation takes 1-2 business days
Arrives from the United States

Item details

Stainless Rivets ~ Stainless Steel Fasteners that work great on thin Leather and standard weight Biothane.

These stainless steel double cap rivets have lovely rounded caps on both sides. With stainless steel, never any worries about tarnish or rust and complete confidence in strength and longevity.

The last thing you or I want is for you to purchase rivets that are too long or too short for your needs.
Please don't think I'm kidding about these measurements! You can't scrunch or stretch these to be anything but exactly what they are. :)

These stainless steel rivets can securely fasten materials that have a total thickness from 0.13" to 0.20"

The Rounded Caps on both sides have a 0.35" Diameter. If you'd like these with larger caps, you can find them here: https://www.etsystudio.com/listing/537476598/

Why is STAINLESS STEEL such a big deal?
I do not use plated metals because the plating often chips and wears through to the base metal over time.
I use only Stainless Steel for these reasons:
Stronger and Harder than Brass and doesn't tarnish or turn green
Virtually indestructible, with inherent long-life properties that do not diminish over time or repeated use.
Well-known for its antibacterial, hypoallergenic and hygienic properties, stainless steel is very easy to clean.

Designers often underestimate or overlook the values of Stainless because of what is viewed as the higher initial costs. However, when taking into consideration the longevity, durability and lack of maintenance needed, Stainless is often the best value option.

Setting tips: Insert the rivet shaft through your material's holes. From the other side, press the cap down on the shaft. Make sure the top and bottom are aligned, straight up and down and not crooked. With a solid stationary surface (rubber mats or wood blocks work well) tap the rivet head to "set". The shaft will spread nicely into the cap if you have them aligned and not crooked.
Use a mallet (rubber and rawhide are perfect) A metal hammer works but might leave an unattractive dent or crease. These rivets require more force to set than plated or brass rivets. Stainless steel is a harder metal and not as malleable. More difficult to set but much more durable and strong once set.

Be advised... these are truly permanent fasteners. Unfastening them without mangling your material is not likely!


FAQs

My 30 watt Fiber Laser Engraver ensures a beautiful and deeply engraved Stainless Steel Name Plate. Your NamePlate info is not simply pasted into a template. It is not all smushed into the center with lots of blank nameplate left. It is thoughtfully laid out and carefully engraved. You are welcome to design your own Name Plate and see how it looks before ordering. There is a link to "Design Your NamePlate" within each Etsy listing. NamePlates are available in 3 sizes: Tiny 1/2" x 2" https://www.etsy.com/listing/610169339/ Small 5/8" x 2" https://www.etsy.com/listing/592438893/ Large 3/4" x 2 1/2" https://www.etsy.com/listing/569141123/ Enjoy choosing your favorite from amongst the fun fonts!

On 1" & 1.5" collars: To provide a sleek and comfy fit, there is a 2" size adjustment range with 5 holes spaced 1/2" apart. This provides plenty of room for your dog to gain or lose a few pounds and eliminates the bulky excess strap end often found in production line collars. On 5/8" & 3/4" Collars: To provide a sleek and comfy fit, there is a 1.5" size adjustment range with 5 holes spaced 3/8" apart. This provides plenty of room for your dog to gain or lose a few pounds and eliminates the bulky excess strap end often found in production line collars. Please do not order collars if your dog is not full grown unless you understand that they will most likely outgrow it in a few months. Thanks!

All Collars and Leashes are lovingly wrapped in PawPrint Tissue and garnished with a PawPrint Ribbon. There is a Collars by Kitt Logo tag attached which has room for a SHORT message. Examples might be: "Happy Birthday Sophie! or "Love, Aunt Jill". Just let me know what you would like your tag to say.

It's my goal for every customer to be tail wagging happy so if you have any problems, don't hesitate to get in touch. When ordering a collar, please measure carefully so you, your dog, and I end up happy. Here are tips on how to accurately measure for collars: https://collarsbykitt.com/how-to-measure/ It's important to read the descriptions and look at all the pictures provided. I know sometimes we're rushing but... well, here's an example. I received a question from a Dog Mom AFTER she placed an order asking "How long is this collar?" The listing title was "20" to 22" Royal Blue Collar - 1" wide". That info was repeated twice in the description. :) Please take your time and don't rush. I'm always happy to answer your questions!

If your collar or leash get soiled, just wash in soapy water, rinse and wipe off excess water. They dry instantly and can be worn/used immediately.

My 30 watt Fiber Laser Engraver ensures a beautiful and deeply engraved Stainless Steel Name Plate. Your NamePlate info is not simply pasted into a template. It is not all smushed into the center with lots of blank nameplate left. It is thoughtfully laid out and carefully engraved. You are welcome to design your own Name Plate and see how it looks before ordering. There is a link to "Design Your NamePlate" within each Etsy listing. NamePlates are available in 3 sizes: Tiny 1/2" x 2" https://www.etsy.com/listing/610169339/ Small 5/8" x 2" https://www.etsy.com/listing/592438893/ Large 3/4" x 2 1/2" https://www.etsy.com/listing/569141123/ Enjoy choosing your favorite from amongst the fun fonts!

On 1" & 1.5" collars: To provide a sleek and comfy fit, there is a 2" size adjustment range with 5 holes spaced 1/2" apart. This provides plenty of room for your dog to gain or lose a few pounds and eliminates the bulky excess strap end often found in production line collars. On 5/8" & 3/4" Collars: To provide a sleek and comfy fit, there is a 1.5" size adjustment range with 5 holes spaced 3/8" apart. This provides plenty of room for your dog to gain or lose a few pounds and eliminates the bulky excess strap end often found in production line collars. Please do not order collars if your dog is not full grown unless you understand that they will most likely outgrow it in a few months. Thanks!

All Collars and Leashes are lovingly wrapped in PawPrint Tissue and garnished with a PawPrint Ribbon. There is a Collars by Kitt Logo tag attached which has room for a SHORT message. Examples might be: "Happy Birthday Sophie! or "Love, Aunt Jill". Just let me know what you would like your tag to say.

It's my goal for every customer to be tail wagging happy so if you have any problems, don't hesitate to get in touch. When ordering a collar, please measure carefully so you, your dog, and I end up happy. Here are tips on how to accurately measure for collars: https://collarsbykitt.com/how-to-measure/ It's important to read the descriptions and look at all the pictures provided. I know sometimes we're rushing but... well, here's an example. I received a question from a Dog Mom AFTER she placed an order asking "How long is this collar?" The listing title was "20" to 22" Royal Blue Collar - 1" wide". That info was repeated twice in the description. :) Please take your time and don't rush. I'm always happy to answer your questions!

If your collar or leash get soiled, just wash in soapy water, rinse and wipe off excess water. They dry instantly and can be worn/used immediately.



    Reviews
    Average review
    (7)
    4 days ago by stevenneuharth
    Stainless rivets are very rare. Used on boat spray hood. Shipping excellent. Communication excellent.
    May 29, 2018 by Warburton
    Great seller. Quick shipper and exactly what I needed. Excellent communication by shop before and after sale.
    Apr 24, 2018 by LeatherWood Studios
    Jan 21, 2018 by Michelle Bouchard
    Dec 23, 2017 by Ray

More from this seller

Shipping & policies
Preparation takes 1-2 business days
Arrives from the United States
Estimated Shipping
Shipping to
Zip or postal code

There is no handling fee . I charge exactly what USPS charges me. If you think your shipping quote is too high or incorrect, please message me. The shipping rates are automated through Etsy and if there is an error, I will be happy to correct it.
I do my best to get every order out as soon as is humanly possible. All the "Make Your Own Collar" items ship within 24 hours. Long Lines ship in 1 to 4 business days. Everything else ships in 4 to 10 business days. Before you order, you are welcome to ask what the current ship time is.
If you are ordering from outside the US, you are responsible for any import/vat/duty/tariff fees. Costs vary widely from one country to another so to avoid any unpleasant surprises, please check. Collars and leashes ship with tariff code 4201.00.30. Swarovski Crystals ship with tariff code 7117.19.0000. I'm sorry, but I cannot fib on the paperwork about the cost of your order.


Payments

We utilize all the payment options that Etsy offers. No reason to make purchasing something difficult for you, right ?!

Kitt


Returns & exchanges
I gladly accept returns and exchanges
Contact me within: 3 days of delivery
Ship items back within: 7 days of delivery
I don't accept cancellations
But please contact me if you have any problems with your order.
The following items can't be returned or exchanged
Because of the nature of these items, unless they arrive damaged or defective, I can't accept returns for:
  • Custom or personalized orders
  • Items on sale
Conditions of return
Buyers are responsible for return shipping costs. If the item is not returned in its original condition, the buyer is responsible for any loss in value.
Additional return information
I will do everything possible to make sure you are pawsitively tail wagging happy. Please measure carefully because each custom collar is made specifically for your order and is not returnable unless I made an Ooopsie.

At CollarsbyKitt.com, there are videos and web pages to assist you in correctly measuring your pup's collar/martingale size. Please measure three times and order once. :)

If a collar is mistaken for a chew toy or attacked by a garbage disposal, I will do my best to resuscitate but there will be operating room fees.

Additional policies

There is detailed information about our Name Plates, Collars and Leashes at https://CollarsbyKitt.com