Vinyl Wrap MUST use dry application for installation!! DO NOT use wet application unless you are certificated installer!!!
- One auction is one D.I.Y. piece of brand new self adhesive vinyl wrap - Pressure-activated adhesive allows you to slid and reposition the film until apply firm pressure - This material can be used on interior or exterior of your vehicle (Surface must be smooth without textured) - It also can be applied on other items such as cell phone, laptop, drum set, guitar, boat, car, motorcycle and so on. - Flexible and durable - Bonds to flat or curved surfaces once you applied heat - It made by PVC plastic material - It is easy to remove without any residual and will not be harmful / damage to the car paint - Help to hide existing scratches and protects from opening door or any other damage. - Help keep higher resale values / lower end-of-lease fees
- Re-positionable vinyl for trouble-free install. - Self adhesive, peel and stick application. Just trim off excess with knife. - Extremely high gross and smooth finish - Stretchable with heat - High temperature & water resistant - Install Temp: 60F to 80F (16C to 32C) - End Use Temp: -65F to 225F (-60C to 107C) - Easily cleansed with water and soap - Long lasting for around 4-5 yr outdoor / 12 yr indoor
- Vinyl Wrap MUST use dry application. Do not use wet application if you are not professional / certificated installer. - Must get all necessary tools such as squeegees, heat gun, 3M primer 94 , 3M edge sealer, 3M spray adhesive. - For complex curves area or stretched too much, installer MUST use 3M primer 94 or 3M spray adhesive to stick better - Professional scratch-free squeegee is high recommended to prevent scratches during the installation. - Make sure use a heat gun to heat the vinyl before reposition or lift up. - We are not responsible for any bubble, reposition, adhesive, tear, crack issues during the installation. These all issues is based on the installer's skills & experiences.