Ghost Trap 3D Printed/DIY Hose Parts

(1)
$20.00
Get Shipping Estimate
$20.00
Made to order
Preparation takes 1-3 business days
Arrives from the United States
Returns and exchanges accepted
See this seller's return policy

Features
Handmade
Made in Emeryville, California

Item details

Ghostbusters Ghost Trap Hose only - no female Foster connectors included.

These are parts for assembling your own hose if you already have your own Foster connectors OR if you are 3D printing connectors from my Ghost Trap files available here: http://www.thingiverse.com/thing:1394492

Ghostbusters Ghost Trap Hose kit with movie-accurate 1/4" split loom and super flexible hose. Hose is sized correctly for female Foster connectors or my 3D printed connectors which can be downloaded at the above link.

Assembly directions are included in the Trap Pedal Standard Guide which can be found here: http://bit.ly/3D_Kit_Instructions

First picture shows what kit includes:
- Approx 9-10' of 1/4" split loom housing
- Matching length of super flexible hose (color may vary) sized correctly for female Foster connectors or my 3D printed versions - color may vary
- Black cable ties for securing the ends
- High-strength neodymium magnets for use in the 3D printed version of the Foster connectors


Finished hose and connectors are shown to demonstrate using 3D printed connectors.
Hose parts only - female Foster connectors not included. Trap and Pedal shown for demonstration.


FAQs

3D printed objects are made by 'slicing' a digital model into many thin layers. These slices are sent to a printer that 'draws' each layer by extruding plastic through a hot nozzle.

There are a lot of different materials available now but the two most common are ABS (LEGO plastic) and PLA (biodegradable plastic) which is what Charlesworth Dynamics uses.

While the 3D prints aren't hazardous, they are not food, dishwasher or microwave safe.

They are very strong, but will break just like any plastic item if abused.

3D prints are very strong if printed properly but will break just like any plastic item if abused. Since the object is printed in layers, they will have a slightly ridged texture to them unlike a injection molded object. There is usually a 'zipper' which is a slight vertical seam that indicates where each new layer starts. They may have slight defects or blemishes and the bottom which adheres to the print bed may have some discoloration. Kit pieces may need minor clean up or trimming to fit together. This is typical of most 3D prints.

Yes, you can sand and paint 3D prints like a normal plastic model. You can even use products like Bondo Glazing and Spotting putty to minimize and smooth the 3D printed texture. Make sure to use a plastic-friendly paint.

I include a link for assembly instructions with your shipping notification, but here's a link for all assembly guides: charlesworth-dynamics.com/2013/08/instructions.html Please don't hesitate to contact me with any questions or recommendations.

On occasion I will also build items out of 'real' parts and hardware - typically I use vintage Film & TV equipment parts. I have made lamps out of old lenses and jewelry out of old camera parts. Keep in mind that these are all used parts and will show their wear and tear and age - it's part of their charm.

3D printed objects are made by 'slicing' a digital model into many thin layers. These slices are sent to a printer that 'draws' each layer by extruding plastic through a hot nozzle.

There are a lot of different materials available now but the two most common are ABS (LEGO plastic) and PLA (biodegradable plastic) which is what Charlesworth Dynamics uses.

While the 3D prints aren't hazardous, they are not food, dishwasher or microwave safe.

They are very strong, but will break just like any plastic item if abused.

3D prints are very strong if printed properly but will break just like any plastic item if abused. Since the object is printed in layers, they will have a slightly ridged texture to them unlike a injection molded object. There is usually a 'zipper' which is a slight vertical seam that indicates where each new layer starts. They may have slight defects or blemishes and the bottom which adheres to the print bed may have some discoloration. Kit pieces may need minor clean up or trimming to fit together. This is typical of most 3D prints.

Yes, you can sand and paint 3D prints like a normal plastic model. You can even use products like Bondo Glazing and Spotting putty to minimize and smooth the 3D printed texture. Make sure to use a plastic-friendly paint.

I include a link for assembly instructions with your shipping notification, but here's a link for all assembly guides: charlesworth-dynamics.com/2013/08/instructions.html Please don't hesitate to contact me with any questions or recommendations.

On occasion I will also build items out of 'real' parts and hardware - typically I use vintage Film & TV equipment parts. I have made lamps out of old lenses and jewelry out of old camera parts. Keep in mind that these are all used parts and will show their wear and tear and age - it's part of their charm.



Reviews
Average review
(1)
CharlesworthDynamics has never let me down. Items are exactly as described, fair prices, and super fast shipping. Thank you!
Jul 21, 2017 by jlisano

More from this seller

Shipping & policies
Preparation takes 1-3 business days
Arrives from the United States
Estimated Shipping
Shipping to
Zip or postal code
Customs and import taxes
Buyers are responsible for any customs and import taxes that may apply. I'm not responsible for delays due to customs.

Payments
Secure options
Etsy Studio keeps your payment information secure. Etsy Studio shops never receive your credit card information.

Returns & exchanges
I gladly accept returns, exchanges, and cancellations
Contact me within: 5 days of delivery
Ship items back within: 14 days of delivery
Request a cancellation within: 12 hours of purchase
The following items can't be returned or exchanged
Because of the nature of these items, unless they arrive damaged or defective, I can't accept returns for:
  • Custom or personalized orders
  • Digital downloads
Conditions of return
Buyers are responsible for return shipping costs. If the item is not returned in its original condition, the buyer is responsible for any loss in value.
Questions about your order?
Please contact me if you have any problems with your order.