This is my On Dragons Wings Tutorial. I would consider this a intermediate/advanced tutorial. You will receive 4 downloads. The tutorial is 20 pages long a weave tutorial This is the base design to build my award winning dragon. You will end up with a beautiful unisex pendant that, with a few tweaks later on, will start you on the path to my dragon with the removable wings. The pendant shown in the pics is the pendant you'll be making.
Any questions, don't hesitate to ask. Supplies needed: 18g round wire - 12-14" or 30-35cm Round cabochon - 1" - 1 1/4" or 25mm - 30mm x 5mm high 22g or 20g wire - 5 pcs - or 11-13" long or 27.5-32.5cm 26g or 28g wire - 25' or 750cm (in 28g wire, you'll use less if you use 26g) 20g square wire - 4 pcs - 11 1/2" long or 28 1/2 cm PLUS 2 pcs. - 3 1/2" or 9cm(check instructions if your cab is higher or lower then the cab I'm using for this tutorial) 20g half round wire - 7' or 210 cm Gemstone beads - 4-6mm (optional) Smooth flat pliers ___mm and ___mm Mandrels assorted sizes for bail Permanent marker Files Ruler Hammer Anvil or another side of a hammer Low tac tape (green painters tape) Liver of sulphur (optional)