Oracal 651 Vinyl 24" x 1', 2', 3', 4' and 5'

Sold by JerosaDesigns
(32)
$1.80+
Get Shipping Estimate
$1.80+
Made to order
Preparation takes 1-3 business days
Arrives from the United States

Features
Handmade
Made in St Louis, Missouri

Item details

Oracal 651 is great for all your projects indoor and outdoor. Good for at least 6 years outdoors and even longer indoors.

Works with most cutters, cricut, silhouette, roland, graphtec, jaguar, etc.

If you would like a different size, please message us. We offer a lot of other sizes.

* 24" x 24" is more due to the increased shipping cost of the size.


FAQs

You can use buyers notes to add any colors selection for your order. Buyers notes can be found on the lower left hand side, after you add items to your cart.

1) Area should be clean and completely dry. 2) Peel bottom liner off vinyl. 3) Apply to area. Squeegee over with a bank card or applicator tool with overlapping strokes. 4) Gently peel back top liner starting at one corner. Tip: If vinyl starts to come off, lay area back down and squeegee over again. (extra-large vinyl can be applied with wet application)

1) Iron area where vinyl will go for 15-20 seconds using the highest, NON-steam setting. 2) Remove the wax paper liner, leaving top liner intact. 3) Place image, vinyl against the fabric, top liner side up, on to the pre-heated material. Place a thin cloth over it (I use a pillowcase), iron for 45-60 seconds. 4) Then turn material over and iron backside of garment for 20-30 seconds, applying medium pressure. 5) Let cool then remove top lining. You can also lay cloth back over it and re-iron after liner is removed to help secure down decal if enough pressure wasn’t applied in step 4. Tip: If decal starts to come off, lay area back down, cover with pillow case and iron again.

1) Pre-heat - Iron shirt where vinyl will go for 15-20 seconds using highest, NON-steam setting. 2) Remove wax paper liner, leaving top liner intact. 3) Place to the pre-heated material. Top liner side up, vinyl should be against fabric. Apply medium pressure with the iron for 45-60 seconds. 4) Repeat step 3 for any additional layers, stacking them one at a time. 5) Repeat for the other side of material. Let cool then remove top lining. If vinyl starts to come off, lay area back down, cover with pillow case and iron again. Tip: You cannot layer on top of the glitter vinyl -that must be the top layer!

You can use buyers notes to add any colors selection for your order. Buyers notes can be found on the lower left hand side, after you add items to your cart.

1) Area should be clean and completely dry. 2) Peel bottom liner off vinyl. 3) Apply to area. Squeegee over with a bank card or applicator tool with overlapping strokes. 4) Gently peel back top liner starting at one corner. Tip: If vinyl starts to come off, lay area back down and squeegee over again. (extra-large vinyl can be applied with wet application)

1) Iron area where vinyl will go for 15-20 seconds using the highest, NON-steam setting. 2) Remove the wax paper liner, leaving top liner intact. 3) Place image, vinyl against the fabric, top liner side up, on to the pre-heated material. Place a thin cloth over it (I use a pillowcase), iron for 45-60 seconds. 4) Then turn material over and iron backside of garment for 20-30 seconds, applying medium pressure. 5) Let cool then remove top lining. You can also lay cloth back over it and re-iron after liner is removed to help secure down decal if enough pressure wasn’t applied in step 4. Tip: If decal starts to come off, lay area back down, cover with pillow case and iron again.

1) Pre-heat - Iron shirt where vinyl will go for 15-20 seconds using highest, NON-steam setting. 2) Remove wax paper liner, leaving top liner intact. 3) Place to the pre-heated material. Top liner side up, vinyl should be against fabric. Apply medium pressure with the iron for 45-60 seconds. 4) Repeat step 3 for any additional layers, stacking them one at a time. 5) Repeat for the other side of material. Let cool then remove top lining. If vinyl starts to come off, lay area back down, cover with pillow case and iron again. Tip: You cannot layer on top of the glitter vinyl -that must be the top layer!



Reviews
Average review
(32)
Nov 20, 2017 by Karly Poole
Aug 6, 2017 by Karly Poole
I ordered some sheets and after I had already purchased I found out I need more. They were nice enough to combine the two orders shipping and refunded the extra. Will order again!
Mar 14, 2017 by Kathryn Trapp
Mar 3, 2017 by Brigett Dison
Jan 12, 2017 by Brigett Dison

More from this seller

Shipping & policies
Preparation takes 1-3 business days
Arrives from the United States
Estimated Shipping
Shipping to
Zip or postal code

All items will be shipped within 1-3 business days of payment unless otherwise noted. We ship all packages via USPS with tracking. All items are securely packaged and/or padded to prevent damage. We also ship internationally too. Shipping charges are calculated by weight and distance automatically.

If you prefer a different method of shipping please message us so we can determine appropriate shipping charges.


Payments

We accept PayPal, Credit Cards or Etsy gift cards.


Returns & exchanges

If you are unhappy with your purchase, please return the item within 7 days for a full refund, minus shipping charges. All returns must be received in original undamaged/unused condition.


Additional policies

If there is any problem with your order, please contact me so we can work on a resolution.

Also, contact me before leaving neutral/negative feedback as your satisfaction really does matter. Thank you for your business!