Single Sheets - Siser Glitter HTV Heat Transfer Vinyl Film - 5", 6", 7", 8", 9", 10", 11", 12", 13", 14", 15" wide up to 20" wide x 20"

Sold by JerosaDesigns
(140)
$2.33+
Get Shipping Estimate
$2.33+
Made to order
Preparation takes 1-3 business days
Arrives from the United States

Features
Handmade
Made in St Louis, Missouri

Item details

These Dazzling colors of Siser Glitter Heat Transfer Vinyl Film Sheets make for a great project. Quality and Durable!

If you would like for us to pre-cut these to fit your mat, please add how you want them cut in buyers note. Examples would be the 20" sizes cut down to 12" and 8" = 20".

If you order more than 1ft of any color, it could be continuous instead of sheets as supply allows. example is, if you order 2 quantity of gold glitter, it will be 2ft rolled up unless we already have pre-cut sizes. If you want these to be cut into sheets, please specify in order notes.

Works with most cutters, cricut, silhouette, roland, grahtec, jaguar, etc.

If you would like a different size, please convo us. We offer a lot of other sizes. Sizes are -/+ 1/4" variance.
If you want more than 20ft, please convo us for availability.

5 pack - https://www.etsystudio.com/listing/506063802/5-pack-siser-glitter-htv-heat-transfer
10 pack - https://www.etsystudio.com/listing/506064206/10-pack-siser-glitter-htv-heat-transfer

Peels cool. Medium Pressure: 302F -320F for 10-15 seconds
Not recommended for layered on top of each other. Glitter should be the top layer.


FAQs

You can use buyers notes to add any colors selection for your order. Buyers notes can be found on the lower left hand side, after you add items to your cart.

1) Area should be clean and completely dry. 2) Peel bottom liner off vinyl. 3) Apply to area. Squeegee over with a bank card or applicator tool with overlapping strokes. 4) Gently peel back top liner starting at one corner. Tip: If vinyl starts to come off, lay area back down and squeegee over again. (extra-large vinyl can be applied with wet application)

1) Iron area where vinyl will go for 15-20 seconds using the highest, NON-steam setting. 2) Remove the wax paper liner, leaving top liner intact. 3) Place image, vinyl against the fabric, top liner side up, on to the pre-heated material. Place a thin cloth over it (I use a pillowcase), iron for 45-60 seconds. 4) Then turn material over and iron backside of garment for 20-30 seconds, applying medium pressure. 5) Let cool then remove top lining. You can also lay cloth back over it and re-iron after liner is removed to help secure down decal if enough pressure wasn’t applied in step 4. Tip: If decal starts to come off, lay area back down, cover with pillow case and iron again.

1) Pre-heat - Iron shirt where vinyl will go for 15-20 seconds using highest, NON-steam setting. 2) Remove wax paper liner, leaving top liner intact. 3) Place to the pre-heated material. Top liner side up, vinyl should be against fabric. Apply medium pressure with the iron for 45-60 seconds. 4) Repeat step 3 for any additional layers, stacking them one at a time. 5) Repeat for the other side of material. Let cool then remove top lining. If vinyl starts to come off, lay area back down, cover with pillow case and iron again. Tip: You cannot layer on top of the glitter vinyl -that must be the top layer!

You can use buyers notes to add any colors selection for your order. Buyers notes can be found on the lower left hand side, after you add items to your cart.

1) Area should be clean and completely dry. 2) Peel bottom liner off vinyl. 3) Apply to area. Squeegee over with a bank card or applicator tool with overlapping strokes. 4) Gently peel back top liner starting at one corner. Tip: If vinyl starts to come off, lay area back down and squeegee over again. (extra-large vinyl can be applied with wet application)

1) Iron area where vinyl will go for 15-20 seconds using the highest, NON-steam setting. 2) Remove the wax paper liner, leaving top liner intact. 3) Place image, vinyl against the fabric, top liner side up, on to the pre-heated material. Place a thin cloth over it (I use a pillowcase), iron for 45-60 seconds. 4) Then turn material over and iron backside of garment for 20-30 seconds, applying medium pressure. 5) Let cool then remove top lining. You can also lay cloth back over it and re-iron after liner is removed to help secure down decal if enough pressure wasn’t applied in step 4. Tip: If decal starts to come off, lay area back down, cover with pillow case and iron again.

1) Pre-heat - Iron shirt where vinyl will go for 15-20 seconds using highest, NON-steam setting. 2) Remove wax paper liner, leaving top liner intact. 3) Place to the pre-heated material. Top liner side up, vinyl should be against fabric. Apply medium pressure with the iron for 45-60 seconds. 4) Repeat step 3 for any additional layers, stacking them one at a time. 5) Repeat for the other side of material. Let cool then remove top lining. If vinyl starts to come off, lay area back down, cover with pillow case and iron again. Tip: You cannot layer on top of the glitter vinyl -that must be the top layer!



Reviews
Average review
(140)
Feb 23, 2018 by sararls
Dec 26, 2017 by Amanda
Dec 18, 2017 by Brittany Frei
Nov 1, 2017 by Amber Riha
Sep 22, 2017 by Danielle Marie

More from this seller

Shipping & policies
Preparation takes 1-3 business days
Arrives from the United States
Estimated Shipping
Shipping to
Zip or postal code

All items will be shipped within 1-3 business days of payment unless otherwise noted. We ship all packages via USPS with tracking. All items are securely packaged and/or padded to prevent damage. We also ship internationally too. Shipping charges are calculated by weight and distance automatically.

If you prefer a different method of shipping please message us so we can determine appropriate shipping charges.


Payments

We accept PayPal, Credit Cards or Etsy gift cards.


Returns & exchanges

If you are unhappy with your purchase, please return the item within 7 days for a full refund, minus shipping charges. All returns must be received in original undamaged/unused condition.


Additional policies

If there is any problem with your order, please contact me so we can work on a resolution.

Also, contact me before leaving neutral/negative feedback as your satisfaction really does matter. Thank you for your business!