Vinyl Adhesive Back Sheets Matte Finish For All Craft & Sign Cutters Kit of 7-12 x 24

Sold by cricutcrazy
(1)
$24.95
+ $6.95 shipping
$24.95
+ $6.95 shipping
In stock
Arrives from the United States

Item details

This for a kit of 7 sheets of 12" x 24" Matte/Flat vinyl
You get to pick which colors you would like mix & match.


I offer 45 colors in of Matte/Flat vinyl. Please email me your color choices. See Photo and at the bottom of this listing you will find the names listed.

This is for 7 - sheets of Matte adhesive
re positionable Oracle Brand12 in x 24 in vinyl it works with both the Craft cutter Personal Electronic Cutter or you can use a exact o knife to cut vinyl. The vinyl sheets have a adhesive back in order to easily apply anywhere you would like to. Great for home decoration, customize signs,scrapbooks. The vinyl works just like regular paper, insert the vinyl sheet in to your Craft cutter and away you go.
This vinyl comes with full instructions and a application stick used for Burnishing. (Burnishing is a rubbing or polishing.


Vinyl Instructions using Transfer Tape
Cutting Vinyl with the Craft Die Cutting System
1) Place vinyl sheet on cutting mat. Load mat into machine and confirm that machine is set to the correct cutting mat size.
2) Make cutting selection and set size as if you where cutting paper, and then press cut. Peel images off cutting mat.
PREPARATION
1) Place vinyl sheet on cutting mat. Load mat into machine and confirm that machine is set to the correct cutting mat size.
2) Make cutting selection and set size. For best results, set blade depth to 6 and pressure to 2.
These settings will result in a "KISS CUT" or a cut that only goes through the vinyl leaving the backing liner uncut.
3) Take ends of transfer tape in each hand with adhesive side facing down. Gently lay transfer tape over vinyl (be sure to lay it straight) image starting in the center and moving out toward the ends.
4) Once tape is in place, use applicator stick to burnish*the tape on to the vinyl. Start in the center and use overlapping strokes.
APPLICATION
1) Completely clean and dry wall (or other surface) area where vinyl image is to be placed. For best results do not use a cleaner that will leave a residue.
2) Lightly place image on wall using level to ensure correct placement.
3) Once image is in place, use applicator stick to burnish* vinyl on to wall. For best results use overlapping strokes when burnishing*
4) Gently peel back transfer tape at 45-degree angle. If vinyl starts to come off with transfer tape, lay area back down and burnish* again.


Cricut Vinyl Instructions Without Transfer Tape

PREPARATION
1) Place vinyl sheet on Cricut cutting mat. Load mat into machine and confirm that machine is set to the correct cutting mat size.
2) Make cutting selection and set size. For best results, set blade depth to 6 and pressure to 2.
These settings will result in a "KISS CUT" or a cut that only goes through the vinyl leaving the backing liner uncut.

APPLICATION
1) Completely clean and dry wall (or other surface) area where vinyl image is to be placed. For best results do not use a cleaner that will leave a residue.
2) Use level and pencil to draw a faint line on wall to aid in placement.
3) Carefully remove the vinyl images one at a time form the backing liner and apply to the wall using the pencil line as a guide. Gently smooth down the vinyl using your fingers.
4) Once all image are placed on the wall, place backing liner over the vinyl and gently burnish* with application stick provided.
5) When complete, carefully wash off or erase pencil lines.



    Reviews
    Average review
    (1)
    Fast shipping, Thank you!
    Jan 5, 2011 by A fellow maker

More from this seller

Shipping & policies
Arrives from the United States
Estimated Shipping
Shipping to
Zip or postal code

Payments

If you request a order cancelation there is a restocking fee on all orders canceled.