Here we have another fantastic deal from Proops Brothers Ltd, buy as a set and save!
Made by our parent company Linic Plastics Ltd here in Fleckney, Leicestershire.
Long tapered rocket candle mould: 9 1/2" long. 7/8" at the top tapering to 3/8" at the bottom.
4 sided pyramid candle mould with removable stand/base: Mould produces candles approximately 4" tall, with a base of 3" square.
Square top, rectangular tapered side candle mould: Top and sides measure 60 x 60 x 120mm tapering down slightly, Square on the bottom measures 50 x 50mm.
Pillar shaped candle mould: 4 1/2" high and 2" dia.
Sphere candle mould: 3" in diameter
Candle mould tray: Heart Shaped- width (biggest part) is 67mm. Bottom tip to top tip is 61mm. Depth 30mm. Flower Shaped- depth 30mm, width 75mm, ridge to ridge 19mm. Ridged Dome- diameter 71mm, ridge to ridge 7mm, depth 30mm. Star shaped- width 59mm, ridge to ridge is 23mm, depth is 30mm.
Here’s a few tips to get a good finish: Remember not to pour in your wax too hot ... pour wax in slowly, use a bit of blue tack to cover any holes, this keeps the wick still and stops any extra wax escaping. You can get mould release spray from craft shops. This is good to coat the mould before you use it, but you can also use a bit of olive oil spray too. We hope this helps.
We have these listed in a singles too check out our other listings.