12"x20" Sheets Metallic Stretch HTV looks like shinny mirror while on the liner. However, after pressed on garment it has a more matte "metallic look". This material will also stretch on stretchable materials!
Heat Application: Preheat for 2-3 seconds Press for 10-12 seconds At 285-310 F With Medium/Heavy Pressure Peel warm 2nd heat press for 2-3 seconds for better washability
Adheres To: 100% cotton 100% uncoated polyester Poly / cotton blends Lycra, Acrylic and similar fabrics
Specifications: Clear Polyester liner 85 Microns Recommended 45 or 60 blade Layering possible Stretchable material
Washing Instructions: Do not dry clean Machine wash warm with mild detergent Hang Dry No chlorine bleach Turn garment inside out Wait 24 hours before first wash
Notes: If you try to layer anything on top of it following normal procedures, whatever you put on top of JSI Stretch Metallic will more than likely come off. However, we have tested further and found that if you press it, peel it, press it again WITH NOTHING ON TOP (no Teflon) for another 5s or so, it seems to burn off whatever film is on the material that prevents another material from adhering to it, and it's good to go. Testing is the key here and you would need to wash the garment a couple of times and see how the layers hold up.
For more information or larger quanties go to jsisigns.com