Gingerbread Man Christmas Cookie Cutter Fondant Cutter Cake Topper

(7)
$7.64
+ $18.36 shipping
$7.64
+ $18.36 shipping
Made to order
Preparation takes 4-6 business days
Arrives from Australia
Returns and exchanges accepted
See this seller's return policy

Features
Handmade
Made in Castle Hill, Australia

Item details

Gingerbread Man Christmas Cookie/Fondant Cutter.

This item is 3D printed by us (using strong and durable ABS).

Listing is for 1 cutter.

Colour available Grey.

Item measures approximate 9.5 cm (3.74 inch) in height and 7.5 cm (2.95 inch) in width.

Cutter will be sent in a padded envelope.

All items are made to order so please allow up to 14 days. If I do have some in stock they will be posted within 3 days.

Hand Wash only. Not Dishwasher safe.

We post with Australia Post and try to keep costs as low as possible with the ever rising postage fees. THIS ITEM COMES WITH TRACKING
We do combine items for shipping when possible. If at any time we overcharge you we will refund the difference.
For international orders it takes approximately 3 to 5 weeks for delivery from Australia. This is based on what we have seen but please allow up to 6 weeks for any custom delays.
Postage time frames are a guide only and parcels can be held up by customs or for other reasons so for this reason no claims can be made prior to 60 days for international deliveries. This is to ensure enough time for the parcel to be delivered or returned if there is an error with your address or any other custom problems.
After this time we will work with you to find a solution.

*Please note that all computer screens vary in their colour profile so the actual colour on the item may appear different onscreen.
*Sorry we offer no refunds or exchanges due to hygiene.

Please view my shop for matching items: http://www.etsy.com/shop/MiraculousDesignsAus
Like our facebook page to keep up to date with new items and sales : http://www.facebook.com/Miraculous-Designs-721241007976418


FAQs

Do not shower, soak or submerge in water/liquids/chemicals. This might remove/destroy the finish/look. Take off your jewellery when using chemicals, applying makeup, lotions, hair spray, showering or swimming. Surface clean with a non-scratching cloth. Avoid exposure to hot water / heat / moisture as this may cause damage. Do not apply to much pressure or force as this can cause damage/ breakage/ snapping/ bending. This can cause sharp edges so do not wear if damaged. Do not consume or chew on. Please note: *Painted products may have a fine layer of residue present after painting. This is more common with metallic paints however paint is permanent.

We can customise/personalise most items. Please contact us with any enquiries and we can discuss. All custom orders must be approved by you, then your item will be produced and posted. *Custom orders usually have an added cost due to the fact that they are unique one off items. These items must be registered post only.

If you want to update painted jewellery we recommend using quality acrylic or enamel paint.

Customer satisfaction is important to us please contact us if you have any concerns and we will do our best to work out a solution. Sorry we do not accept refund or exchange on custom or personalised items. There is no refund or exchange on earrings or cookie cutters/stamps due to hygiene. If your item is damaged in transit please provide images within 48 hours and item will be replaced, no refunds will be given. Item must be returned undamaged in in original packaging. Lost pieces cannot be replaced. Please be aware that pieces are delicate and should be worn with care.

We post with Australia Post and and try to keep costs as low as possible with the ever rising postage fees. Standard charges do come with tracking. A express upgrade can be added to this listing for Australia. (Please note express can still take more then one day) Please choose the shipping upgrade option if you are concerned about items going missing as we can not be held responsible for items once they leave out hands if they are not tracked. We do combine items for shipping when possible. Australia Post estimate delivery range from 5-15 working days once posted but please allow up to 4 weeks for Australia and 6 weeks for International. US and Canada and all international, tracking only option is available.

Postage time frames are a guide only and parcels can be held up by customs or for other reasons so for this reason no claims can be made prior to 60 days for international deliveries. This is to ensure enough time for the parcel to be delivered or returned if there is an error with your address or any other custom problems. Please make sure your address is correct to time of purchase as we are not responsible for any incorrect addresses or additional re-postage fees. (Buyer is responsible for incorrect address postage fees and for re-postage costs including post office returns to sender for non pickup) After this time we will work with you to find a solution.

Some off our cutters have designs that you may have trouble stamping. We have tested all our items and they do stamp correctly and have found that it is best to use a shortbread dough left to rest in the fridge or a mixture not to sticky for cookies. For best results with these designs we recommend cutting around the stamped print. If you’re the type to clean all your tools the second you’re done using them, and not leave things soaking in the sink, then you’ll probably need to go over the cutters with a brush or toothpick to dig the dough out. But nothing that you wouldn’t have to do with any cookie cutter. (our stamps are not rubber or recommend to be used with ink.)

The material used for our 3D printing is strong and durable ABS, which is the same plastic as LEGOs. We don’t use PLA plastic as it can easily warp when cleaned. ABS has a much higher melting point (it can get much hotter before there's any risk of plastic contamination). The only time it’s not safe to have in contact with food is if it’s heated up – only then can plastic contamination occur. When plastic is heated up, it can lead to plastic contamination in both ways - food can stain the plastic, and the plastic can contaminate the food. In any case, these cutters won’t have any contamination under normal use because your dough should be room temperature or cooler.

The only worry is if you heat them up in the microwave or oven, which obviously, YOU SHOULD NOT DO. Food safety also depends on how the object is being printed (minimal gaps and clean print) regardless of the plastic material used. We strive to produce the best possible print in every occasion. Our recommendation is to clean the cookie cutters/stamp to avoid any small food items that may get caught in any open gaps, small corners and crevices. ABS being strong will allow you to clean the item properly. Avoid dishwasher cleaning. We don’t take any responsibility for misuse or lack of cleanliness of our items. Please ensure you maintain your items to get the most out of them.

The Paint we use on our cake toppers including Glitter Paint is non toxic. If you have concerns we can tape up the stick and not paint it. Our Bamboo Timber toppers are laser cut from 2.5-3mm bamboo plywood. This product contains formaldehyde free glue adhesives. They can retain a natural burn smell due to the laser cutting process & may have burn residue. We do lightly coat them in a natural food safe oil. If you would like a longer stick to leave space for cake decorations please contact us & we can try to adjust this. Toppers are intended for display purposes only. They are delicate and should be handled with care. Do not wash and do not consume product.

Do not shower, soak or submerge in water/liquids/chemicals. This might remove/destroy the finish/look. Take off your jewellery when using chemicals, applying makeup, lotions, hair spray, showering or swimming. Surface clean with a non-scratching cloth. Avoid exposure to hot water / heat / moisture as this may cause damage. Do not apply to much pressure or force as this can cause damage/ breakage/ snapping/ bending. This can cause sharp edges so do not wear if damaged. Do not consume or chew on. Please note: *Painted products may have a fine layer of residue present after painting. This is more common with metallic paints however paint is permanent.

We can customise/personalise most items. Please contact us with any enquiries and we can discuss. All custom orders must be approved by you, then your item will be produced and posted. *Custom orders usually have an added cost due to the fact that they are unique one off items. These items must be registered post only.

If you want to update painted jewellery we recommend using quality acrylic or enamel paint.

Customer satisfaction is important to us please contact us if you have any concerns and we will do our best to work out a solution. Sorry we do not accept refund or exchange on custom or personalised items. There is no refund or exchange on earrings or cookie cutters/stamps due to hygiene. If your item is damaged in transit please provide images within 48 hours and item will be replaced, no refunds will be given. Item must be returned undamaged in in original packaging. Lost pieces cannot be replaced. Please be aware that pieces are delicate and should be worn with care.

We post with Australia Post and and try to keep costs as low as possible with the ever rising postage fees. Standard charges do come with tracking. A express upgrade can be added to this listing for Australia. (Please note express can still take more then one day) Please choose the shipping upgrade option if you are concerned about items going missing as we can not be held responsible for items once they leave out hands if they are not tracked. We do combine items for shipping when possible. Australia Post estimate delivery range from 5-15 working days once posted but please allow up to 4 weeks for Australia and 6 weeks for International. US and Canada and all international, tracking only option is available.

Postage time frames are a guide only and parcels can be held up by customs or for other reasons so for this reason no claims can be made prior to 60 days for international deliveries. This is to ensure enough time for the parcel to be delivered or returned if there is an error with your address or any other custom problems. Please make sure your address is correct to time of purchase as we are not responsible for any incorrect addresses or additional re-postage fees. (Buyer is responsible for incorrect address postage fees and for re-postage costs including post office returns to sender for non pickup) After this time we will work with you to find a solution.

Some off our cutters have designs that you may have trouble stamping. We have tested all our items and they do stamp correctly and have found that it is best to use a shortbread dough left to rest in the fridge or a mixture not to sticky for cookies. For best results with these designs we recommend cutting around the stamped print. If you’re the type to clean all your tools the second you’re done using them, and not leave things soaking in the sink, then you’ll probably need to go over the cutters with a brush or toothpick to dig the dough out. But nothing that you wouldn’t have to do with any cookie cutter. (our stamps are not rubber or recommend to be used with ink.)

The material used for our 3D printing is strong and durable ABS, which is the same plastic as LEGOs. We don’t use PLA plastic as it can easily warp when cleaned. ABS has a much higher melting point (it can get much hotter before there's any risk of plastic contamination). The only time it’s not safe to have in contact with food is if it’s heated up – only then can plastic contamination occur. When plastic is heated up, it can lead to plastic contamination in both ways - food can stain the plastic, and the plastic can contaminate the food. In any case, these cutters won’t have any contamination under normal use because your dough should be room temperature or cooler.

The only worry is if you heat them up in the microwave or oven, which obviously, YOU SHOULD NOT DO. Food safety also depends on how the object is being printed (minimal gaps and clean print) regardless of the plastic material used. We strive to produce the best possible print in every occasion. Our recommendation is to clean the cookie cutters/stamp to avoid any small food items that may get caught in any open gaps, small corners and crevices. ABS being strong will allow you to clean the item properly. Avoid dishwasher cleaning. We don’t take any responsibility for misuse or lack of cleanliness of our items. Please ensure you maintain your items to get the most out of them.

The Paint we use on our cake toppers including Glitter Paint is non toxic. If you have concerns we can tape up the stick and not paint it. Our Bamboo Timber toppers are laser cut from 2.5-3mm bamboo plywood. This product contains formaldehyde free glue adhesives. They can retain a natural burn smell due to the laser cutting process & may have burn residue. We do lightly coat them in a natural food safe oil. If you would like a longer stick to leave space for cake decorations please contact us & we can try to adjust this. Toppers are intended for display purposes only. They are delicate and should be handled with care. Do not wash and do not consume product.



    Reviews
    Average review
    (7)
    Dec 18, 2017 by Smurf100
    Nov 13, 2017 by Kate Williams
    Perfect. Quick post. Super cute & easy cookie cutter
    Nov 8, 2017 by yolondababe
    Nov 6, 2017 by Sarah Jackson
    Oct 28, 2017 by Shanan Guirreri

More from this seller

Shipping & policies
Preparation takes 4-6 business days
Arrives from Australia
Estimated Shipping
Shipping to
Zip or postal code
Customs and import taxes
Buyers are responsible for any customs and import taxes that may apply. I'm not responsible for delays due to customs.

Payments
Secure options
Etsy Studio keeps your payment information secure. Etsy Studio shops never receive your credit card information.

Returns & exchanges
I gladly accept returns, exchanges, and cancellations
Contact me within: 3 days of delivery
Ship items back within: 30 days of delivery
Request a cancellation within: 24 hours of purchase
The following items can't be returned or exchanged
Because of the nature of these items, unless they arrive damaged or defective, I can't accept returns for:
  • Custom or personalized orders
  • Perishable products (like food or flowers)
  • Digital downloads
  • Intimate items (for health/hygiene reasons)
  • Items on sale
Conditions of return
Buyers are responsible for return shipping costs. If the item is not returned in its original condition, the buyer is responsible for any loss in value.
Questions about your order?
Please contact me if you have any problems with your order.