This is a digital file
This listing is a file for embroidery machines, not an embroidered item.
It is an applique 5th wheel camper sized for a 5 x 7 hoop. (I also have this design in 6 x 10 and will be uploading it when I have time. If you need a 6 x 10 before then, send me a conversation and I will get right on it.) Actual dimensions and stitch count are shown on the color charge photograph.
The zip file contains the design (along with the color chart photograph and written instructions) in the following formats: DST, EMD, EXP, HUS, JEF, M1, PES, PHC, and VIP. Other formats available on request.
Please do read the instructions, as they will save you some time and thread changes.
While I have your attention, note that my test sew (see the other photograph) uses three fabrics - one for the awning, and TWO for the main body of the camper. The second fabric is for "shadows" on the side of the slide-out and under the front extension. These shadow fabrics are optional. The written instructions will tell you what steps to skip if you don't want to use them.
I test-sewed this design on muslin with rayon thread and tear-away stabilizer. While I do not anticipate that you will have any problems sewing the design, if you are using fabric that is much thinner or thicker than muslin, you should test-sew the design using materials similar to what you'll use for your final project.
One other hint: If you intend to use this design on burlap or some other "nubby" fabric, you might want to float a piece of water-soluable stablizer on top of the design (after you add the main camper applique fabric) to keep your stitches from disappearing into the weave of the fabric.