KAM snap tabletop press to apply snaps.
Comes with dies to apply size 20 snaps and 200 sets of snaps!
25 sets of each color:
B7 Bright Yellow
B8 Bright Blue
Very easy to use:
1.) Screw in the socket dye or stud dye into the top opening of the press (there is one dye for each).
2.) Snap the socket or stud into the end of it's appropriate dye in the top of the press (if it doesn't snap in it's not the right part).
2.) Place the cap dye (it's the heavy piece and doesn't screw in) into the bottom opening of the press.
3.) Place the cap into the cap dye and place fabric on top (holes can be made with an awl or the cap itself).
4.) Press the handle firmly. (This may take some practice. Too hard can make the snap crack. Not hard enough and the center nub will stick up enough to cause snapping problems.)
5.) Remove the snap from the top dye. Done!
The press can be bolted to your tabletop.