Ghost Trap Mega Hardware Kit - Combine & Save!

(2)
$205.00+
Get Shipping Estimate
$205.00+
In stock
Preparation takes 1-3 business days
Arrives from the United States
Returns and exchanges accepted
See this seller's return policy

Features
Handmade
Made in Emeryville, California

Item details

NOW WITH FAUX METAL SIDE PLATES

Save $26 and shipping costs by buying all the Standard and Deluxe hardware for both the Trap and Pedal in one kit! This combo has all of the hardware needed to assemble my 3D printed Ghostbusters Ghost Trap and Pedal as well as all the Deluxe movie-accurate upgrades - plus the hose and now Faux Metal Side Plates.

THIS IS NOT A FULL GHOST TRAP.
THIS IS ONLY THE ASSEMBLY HARDWARE IN FIRST TWO PICTURES ALONG WITH HOSE AND PLATES.
YOU MUST 3D PRINT YOUR OWN PARTS - Download and print the parts for my Ghost Trap here: http://bit.ly/Ghost_Trap_3D_Files
NO ELECTRONICS INCLUDED (other than switch, LED's, etc shown)

INCLUDES THE FOLLOWING:
Trap Standard Kit - All the nuts and bolts, door axles, and hex drivers needed to build a basic Trap - https://www.etsystudio.com/listing/271374377

Trap Deluxe Kit - Movie-accurate hardware upgrades including metal handle, CAL-R resistor, Foster connector, wheels, toggle switch, metal knob, LED cover, lighting gel and more - https://www.etsystudio.com/listing/271402879

Faux Metal Side Plates - laser cut acrylic plates with faux brushed metal top. All appropriate holes cut out for GB2 version of trap - https://www.etsystudio.com/listing/564901150

Pedal Standard Kit - Relay, ribbon cable, tubing, nuts and bolts, pedal bellows, hinge and more - https://www.etsystudio.com/listing/271383393

Pedal Deluxe Kit - Project boxes, relay socket, Foster connector, microswitch, computer connectors and more - https://www.etsystudio.com/listing/271511866

Deluxe Hose - 10' long with authentic female Foster connectors. If you intend on installing electronics get the DIY hose. Otherwise pick the Fully Assembled OR DIY version - DIY kit does not include red tape at ends - https://www.etsystudio.com/listing/268350270

See the individual listings for even more info on each kit.
See the fully illustrated assembly guides here: http://bit.ly/3D_Kit_Instructions

Assembled Trap is for demonstration only. Trap and body parts are NOT included. This kit is for the nuts and bolts to assemble your own Trap that you print out. Close up picture of Trap shows Faux Metal Plates. Picture of Trap and Pedal together shows real metal plates (not included).

See more about how the Trap was made on Tested.com:
http://bit.ly/Ghost_Trap_on_Tested


FAQs

3D printed objects are made by 'slicing' a digital model into many thin layers. These slices are sent to a printer that 'draws' each layer by extruding plastic through a hot nozzle.

There are a lot of different materials available now but the two most common are ABS (LEGO plastic) and PLA (biodegradable plastic) which is what Charlesworth Dynamics uses.

While the 3D prints aren't hazardous, they are not food, dishwasher or microwave safe.

They are very strong, but will break just like any plastic item if abused.

3D prints are very strong if printed properly but will break just like any plastic item if abused. Since the object is printed in layers, they will have a slightly ridged texture to them unlike a injection molded object. There is usually a 'zipper' which is a slight vertical seam that indicates where each new layer starts. They may have slight defects or blemishes and the bottom which adheres to the print bed may have some discoloration. Kit pieces may need minor clean up or trimming to fit together. This is typical of most 3D prints.

Yes, you can sand and paint 3D prints like a normal plastic model. You can even use products like Bondo Glazing and Spotting putty to minimize and smooth the 3D printed texture. Make sure to use a plastic-friendly paint.

I include a link for assembly instructions with your shipping notification, but here's a link for all assembly guides: charlesworth-dynamics.com/2013/08/instructions.html Please don't hesitate to contact me with any questions or recommendations.

On occasion I will also build items out of 'real' parts and hardware - typically I use vintage Film & TV equipment parts. I have made lamps out of old lenses and jewelry out of old camera parts. Keep in mind that these are all used parts and will show their wear and tear and age - it's part of their charm.

3D printed objects are made by 'slicing' a digital model into many thin layers. These slices are sent to a printer that 'draws' each layer by extruding plastic through a hot nozzle.

There are a lot of different materials available now but the two most common are ABS (LEGO plastic) and PLA (biodegradable plastic) which is what Charlesworth Dynamics uses.

While the 3D prints aren't hazardous, they are not food, dishwasher or microwave safe.

They are very strong, but will break just like any plastic item if abused.

3D prints are very strong if printed properly but will break just like any plastic item if abused. Since the object is printed in layers, they will have a slightly ridged texture to them unlike a injection molded object. There is usually a 'zipper' which is a slight vertical seam that indicates where each new layer starts. They may have slight defects or blemishes and the bottom which adheres to the print bed may have some discoloration. Kit pieces may need minor clean up or trimming to fit together. This is typical of most 3D prints.

Yes, you can sand and paint 3D prints like a normal plastic model. You can even use products like Bondo Glazing and Spotting putty to minimize and smooth the 3D printed texture. Make sure to use a plastic-friendly paint.

I include a link for assembly instructions with your shipping notification, but here's a link for all assembly guides: charlesworth-dynamics.com/2013/08/instructions.html Please don't hesitate to contact me with any questions or recommendations.

On occasion I will also build items out of 'real' parts and hardware - typically I use vintage Film & TV equipment parts. I have made lamps out of old lenses and jewelry out of old camera parts. Keep in mind that these are all used parts and will show their wear and tear and age - it's part of their charm.



Reviews
Average review
(2)
Shipping was on time and very fast. Very happy, have not started putting it together yet but I’m sure it will be nice and simple
Apr 11, 2018 by Richard Salmon
Exactly as advertised. Great and fast communication from seller. Will buy from again.
Jan 15, 2018 by Carla Siler-Maddalena

More from this seller

Shipping & policies
Preparation takes 1-3 business days
Arrives from the United States
Estimated Shipping
Shipping to
Zip or postal code
Customs and import taxes
Buyers are responsible for any customs and import taxes that may apply. I'm not responsible for delays due to customs.

Payments
Secure options
Etsy Studio keeps your payment information secure. Etsy Studio shops never receive your credit card information.

Returns & exchanges
I gladly accept returns, exchanges, and cancellations
Contact me within: 5 days of delivery
Ship items back within: 14 days of delivery
Request a cancellation within: 12 hours of purchase
The following items can't be returned or exchanged
Because of the nature of these items, unless they arrive damaged or defective, I can't accept returns for:
  • Custom or personalized orders
  • Digital downloads
Conditions of return
Buyers are responsible for return shipping costs. If the item is not returned in its original condition, the buyer is responsible for any loss in value.
Questions about your order?
Please contact me if you have any problems with your order.