This loom has adjustable warp height - 46" maximum to 14" minimum, in 4" increments. To adjust, the peg bars can move to different holes on the side bars, by resetting two screws and wingnuts at each corner, no tools needed.
You can easily change which end is up, in order to work downward from either end. Just loosen the two wingnuts connecting the frame to the stand, rotate the frame so it`s facing away from you, then turn the loom and stand to face you again, retighten the stand wingnuts, and resume twining.
The pegs are 1/4" oak, extend out 1-1/2", and are 1" center-to-center. The boards are pine with a linseed oil finish.
The loom can be disassembled partially or completely (except for the pegs) for transport or storage. Assembly instructions included.
Variations available as custom orders: Oak boards - add $22 Other hardwoods - depends on $/ft. from store 3/4" peg spacing (pine) - add $12 1/2" peg spacing and oak boards - add $42 No linseed oil - subtract $10 Painted or stained - add $10