UNICORN SPiT Gel Stain and Glaze all-in-one = 14 Colors Available = 4oz size

Sold by LadybgrWorld
(3)
$9.00
Get Shipping Estimate
$9.00
In stock
Ships next business day
Arrives from the United States
Returns accepted
See this seller's return policy

Features
Handmade
Made in Baltimore, Ohio

Item details

UNICORN SPIT GEL STAIN AND GLAZE IN ONE!

UNICORN SPiT allows anyone to turn ordinary objects into personalized MASTERPIECES!
Use on wood, glass, metal, fabric, pottery, wicker, concrete and laminate. Ideal for creating new - or - refinishing thousands of projects. Excellent for Crafters, Makers, Hobbyists, DIYers and Pros too!

• PAINT, GEL STAIN and GLAZE in One!
• 10 vibrant colors!
• Make your project as opaque or vibrant as your dreams require.
Use as a PAINT or dilute with water to create a GEL, GLAZE, STAIN, WHITE WASH
or ANTIQUING TINT!
• Penetrates deep into the bare wood grain or glazes over existing finishes,
brightens and highlights chalk paint, and provides a 3-D dimensional effect
• Jasmine scented
• Use indoors or outdoors
Unicorn SPiT Directions as a STAIN, PAINT, GLAZE

PRODUCT SPECS

Sizes Available: 4.0 fl oz (118.2 mL), 8.0 fl oz (236.5 mL)
Colors: Available in 10 colors

INSTRUCTIONS FOR SAFE USE

Use Unicorn SPiT® as a paint, gel or stain on most any material. Create masterpieces on wood, glass, metal, fabric, pottery, concrete, laminate, wicker and most other substrates.

GENERAL DIRECTIONS:

SHAKE WELL and test small area before use. Can be applied with a brush, foam pad, or your hands! Dry time depends upon thickness of the application. Dry time is approximately 30-60 minutes (depending on material, humidity and temperature) or until a chalky finish appears. Unicorn SPiT dries quickly. Use a spray bottle of water to keep product from drying out and to easily manipulate. Once dry, use FAMOWOOD GLAZE COAT or other non-waterbased coatings to protect add gloss and dimension.

Laminate use: Sand the surface with 220 sand paper after cleaning, then dust well before applying
Glass: To add durability to the exterior of regularly handled items, put a thin layer of DISHWASHER SAFE decoupage on the surface, allow to dry, then apply Unicorn SPiT.
Fabric use: Use Unicorn SPiT full strength for “stamping” (creating design on a separate surface and then “stamping” it on to a fabric project). Then, use a water bottle and your hand or brush to blend. For “direct to fabric” projects, mix Unicorn SPiT with 6 parts water in a spray bottle or cup and brush it on, drip it on or spray it on. Use a product intended for waterproofing fabric after Unicorn SPiT has completely dried.

Recommended dilution ranges:

Treatment / Application Type Water Dilution Ratio
PAINT / HEAVY GLAZE or ANTIQUING
/ DRY BRUSHING 0-10%
LIGHT GLAZE / LIGHT WHITE-WASH
/ LIGHT ANTIQUING 10-30%
WOOD STAIN (BARE WOOD) /
DYE FOR STAINED SURFACES 30-50%
DISTRESSED WOOD (BARE WOOD) 50-70%
FABRIC (Up to 85% water for spraying) 60-80%
CONCRETE 0-90%
GLASS 0-30%

NOTE: Distilled or purified water is recommended rather than hard or high mineral water.

DIRECTIONS FOR USE AS A PAINT, HEAVY GLAZE, or ANTIQUING/DRY BRUSHING ON WOOD, GLASS, METAL, FABRIC, POTTERY, WICKER, CONCRETE AND LAMINATE:

SHAKE BEFORE USING.
Use Unicorn SPiT right out of the bottle for a paint application or dilute it up to 10% with water for antiquing or dry brushing. Diluting Unicorn SPiT with water allows you to control the opaqueness. For antiquing or dry brushing, add 10 parts Unicorn SPiT in a re-sealable container to be diluted with water. Test the dilution on a small, dry, clean sample piece of the same substrate as your project, gradually adding up to 1 part water until the desired effect is achieved.
Apply the diluted Unicorn SPiT to the surface once it is completely void of all oil, sealer, dirt, grime, paint, stain, or anything that may inhibit the product from contacting the bare surface.
Continue to add or blend multiple colors to the surface in separate areas creating designs to achieve the desired look.
Allow to dry. Dry time is approximately 30-60 minutes (depending on material, humidity and temperature) or until a chalky finish appears.
After drying, lightly buff the surface with a fine grain sandpaper (120-220 grit) or extra-fine steel wool (following the grain) to remove any excess or clumps.
Dust off thoroughly.
Seal with FAMOWOOD GLAZE COAT or most any oil-based coating/sealer. For better protection and a higher gloss, repeat coats of sealer as indicated on the product’s instructions. High gloss sealers will help achieve a three dimensional look.


DIRECTIONS FOR USE AS A LIGHT GLAZE, WHITE WASH OR ANTIQUING AGENT:

SHAKE BEFORE USING
Dilute Unicorn SPiT up to 30% with water to make a light glaze, white wash or antiquing agent. Diluting Unicorn SPiT with water allows you to control the opaqueness. Add 10 parts Unicorn Spit in a re-sealable container to be diluted with water. Test the dilution on a small, dry, clean sample piece of the same substrate as your project, gradually adding up to 3 parts water until the desired effect is achieved.
Apply the diluted Unicorn SPiT to the surface once it is completely void of all oil, dirt, grime, paint, stain, or anything that may inhibit the product from making contact with the surface to antique, age, paint, highlight or lowlight.
Continue to add or blend multiple colors to the surface in separate areas creating designs to achieve the desired look.
Once dry, use a soft (dry or damp) cloth to polish away Unicorn SPiT until your desired effect has been achieved.
Apply to unsealed chalk or mineral style paint to create custom color highlighting and lowlighting before sealing.
Allow to dry. Dry time is approximately 30-60 minutes (depending on material, humidity and temperature) or until a chalky finish appears.
Seal with FAMOWOOD GLAZE COAT or most any oil-based coating/sealer. For better protection and a higher gloss, repeat coats of sealer as indicated on the product’s instructions. High Gloss Sealers will help achieve a three dimensional look.


DIRECTIONS FOR USE AS A STAIN OR DYE:

SHAKE BEFORE USING.
Dilute Unicorn SPiT up to 50% with water to make stain. Diluting Unicorn SPiT with water allows you to control the opaqueness and absorption into the porous surface. Add 10 parts Unicorn Spit in a re-sealable container to be diluted with water. Test the dilution on a small, dry, clean and bare sample piece of the same substrate as your project, gradually adding up to 5 parts water until the desired effect is achieved.
Apply the diluted Unicorn SPiT to the bare surface once it is completely void of all oil, sealer, dirt, grime, paint, stain, or anything that may inhibit the product from making contacting with the bare porous surface.
Continue to add or blend multiple colors to the surface in separate areas creating designs to achieve the desired look.
Allow to dry. Dry time is approximately 30-60 minutes (depending on material, humidity and temperature) or until a chalky finish appears.
After drying, lightly buff the surface with a fine grade sand paper (120-220 grit) or extra-fine steel wool (following the grain) to remove any excess or clumps.
Dust off thoroughly.
Seal with FAMOWOOD GLAZE COAT or most any oil-based coating/sealer. For better protection and a higher gloss, repeat coats of sealer as indicated on the product instructions. High Gloss Sealers will help achieve a three dimensional look.


TIPS TO CREATE VARIOUS FINISHES: Intermingle chalky paint finishes or metallic spray paint with Unicorn SPiT to achieve unique finishes. Topcoats must be oil-based. Water-based coatings will alter the look of Unicorn SPiT.

CUSTOM COLORS: Most water-based paints (chalk style or mineral based) can be mixed with Unicorn SPiT to create custom colors.
Tips
You can use other products with the SPiT – such as chalky finishes paints, metallic spray paints, or other mediums, like most art – a lot of artists incorporate different products to achieve a desired finished product.


FAQs

Yes I do wholesale orders. Feel free to reach out to me to place an order, minimum requirements and deposit.

Birdhouse gourds do not have to be cleaned out, burds will recycle nesting material. Yearly recoating of external varnish is required to maintain the artwork on your gourd(more often in harsh elements).

No gourd is exactly the same as the other. Please understand you may recieve different shape than as pictured. If requested I will do my best to match exactly.

Yes I do wholesale orders. Feel free to reach out to me to place an order, minimum requirements and deposit.

Birdhouse gourds do not have to be cleaned out, burds will recycle nesting material. Yearly recoating of external varnish is required to maintain the artwork on your gourd(more often in harsh elements).

No gourd is exactly the same as the other. Please understand you may recieve different shape than as pictured. If requested I will do my best to match exactly.



Reviews
Average review
(3)
I'm sure it works well on glass, but the purple ends up looking brown on wood. I'll figure something else out for my project.
Jan 22, 2018 by Shelbie Fae
Great stain/paint!! Cool colors and a great seller!!!
Dec 21, 2017 by Jellybeens
Oct 1, 2017 by cc

More from this seller

Shipping & policies
Ships next business day
Arrives from the United States
Estimated Shipping
Shipping to
Zip or postal code
Customs and import taxes
Buyers are responsible for any customs and import taxes that may apply. I'm not responsible for delays due to customs.

Payments
Secure options
Etsy Studio keeps your payment information secure. Etsy Studio shops never receive your credit card information.

Returns & exchanges
I gladly accept returns
Contact me within: 14 days of delivery
Ship items back within: 21 days of delivery
I don't accept exchanges or cancellations
But please contact me if you have any problems with your order.
The following items can't be returned or exchanged
Because of the nature of these items, unless they arrive damaged or defective, I can't accept returns for:
  • Custom or personalized orders
  • Perishable products (like food or flowers)
  • Digital downloads
  • Intimate items (for health/hygiene reasons)
  • Items on sale
Conditions of return
Buyers are responsible for return shipping costs. If the item is not returned in its original condition, the buyer is responsible for any loss in value.