Tutorial 3-Wire Over Pendant Design

Sold by ggChambers

This is a digital file

Get Shipping Estimate
In stock
Digital download


Item details

This is an intermediate to advanced tutorial with 35 pages and over 100 color photos, showing you detailed instructions on how to make my original design, the 3-Wire Pendant Frame.

Tutorial Level: Intermediate to Advanced Wire Weaving

You should have some prior knowledge of basic multi-strand wire weaving, bending, cutting, and general wire manipulation and secure capture of a cabochon. This tutorial is meant not only to teach new skills, but to enhance skills you may already have, and to give you the working knowledge to use this tutorial as a step off point in helping you develop new designs of your own.

Material List:
20 gauge dead soft wire
28 or 30 gauge dead soft weave wire (either one will work. Use the one you are most comfortable with to start)
One 30mm x 16mm oval cabochon (or smaller for your first project)

Tool List:
Needle Nose or Round Nose Pliers
Flat Nose Pliers
Nylon Jaw Pliers
Ring Vice, Clamp, or Tape to hold the ends of your base wires

**Please note that this tutorial is copyrighted by ggChambers designs LLC and as such cannot be reproduced, sold, printed, or taught in total or in part by anyone other than the author. But...you can make this pendant as many times as you want. If you make it for resale, please give me credit for the design. Other than that, just have fun with it!

"Stay Wired Up!"