Big Tray Kid and Butterfly Goats Milk pattern Soap Mold Makes 12 7.25oz Bars 3" x 2 5/8" x 1" Milky Way Melt & Pour Cold Process Soaps MW274
This adorable design features a young goat making friends with a butterfly (or possibly deciding if it’s edible). The Large Kid & Butterfly Tray Soap Mold features the words “GOAT MILK SOAP” across the top and is perfect for your homemade goat milk soap.
Helpful Product Information:
Material: Plastic Style: Tray
Avg. Bar Weight: 7.25 oz Bar Cavities: 12
Bar Depth: 3" Bar Length: 1"
Bar Width: 2 5/8" Max Temperature: 135ºF
The designs for Milky Way's award-winning soap molds are sculpted for the finest details available. They are suitable for hobbyists and professional soap makers. Soap is easist to release 12-24 hours after cooling.
Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold, and slice into bars. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.
Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Slice into bars. Allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Lotion Bars: Pour melted lotion bar mixture into mold at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold. Slice into lotion bars.
Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.