Each of the bottle sizes are sold individually not as a set. Bob Smith Industries Insta-Cure ™ Super Thin Glue has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a vapor that can irritate the nose and eyes, so be prepared. Thin CAs work very well on balsa since they penetrate into the wood and form more than just a surface bond.
Bob Smith Industries Insta-Cure+™ Medium Gap Filling Glue is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out.
Bob Smith Industries Maxi-Cure™ Extra Thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE™ is the best choice for plastic model assembly. When used with INSTA-SET™, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a finish indistinguishable from plastic. MAXI-CURE™ bonds fiberglass, hardwood, metal and rubber better than any other hobby adhesive. For gluing to the inside, clothtextured surface of fiberglass, scrape the area to be bonded with a razor blade or coarse sandpaper before using MAXI-CURE™ or any other adhesive. It also is best for bonding the tires for R/C cars. MAXI-CURE™ has proven to be very popular in the archery business for the fletching of vanes onto aluminum and carbon arrow shafts. Along with being the strongest, MAXI-CURE™ is usually the least expensive option for this application. Extra CA Top - #312 Replacement top that is on all of BSI's non-Pocket CAs. Tops can be soaked in acetone overnight to remove any buildup of CA on the inside and outside of the nozzle.Tops can be soaked in acetone overnight to remove any build up of CA on the inside and outside of the nozzle or top. Extra CA Over Cap Replacement colored cap that fits over the #312 top.
We are a family owned and operated business located in Prescott Valley, Arizona. We have been in business for 40 years and sell the highest quality merchandise available. Items will be shipped USPS. Items will take 2-5 days for delivery. If purchasing 2 items or more please wait for invoice as items will be shipped USPS Flat Rate Box for $5.75. If you do not wait for invoice for combined shipping no money will be refunded. International shipping prices will vary so please wait for invoice with updated shipping cost. Items will ship within 48 hours of being purchased. We offer a 14-day Money Back Guarantee. (All items Returned AS IS) We combine shipping on most purchases. Please request total and we will give you the best shipping available. Buyer Pays Return Shipping. Thank You For Your Business