gel transfer to transfer a printed image on, preferably cotton fabric, water-based. You can transfer images of newspapers and magazines, drawings made by hand and printed by computer. It is strongly recommended to print with a laser printer on paper 80 g / m² to avoid problems due to various types of chemicals. It is important to distribute a fair amount of product, allow time to allow the image of being well imbued by Frost and be very gentle when removing paper for a good result. Do not use dryer to dry. Directions: -cut leaving a millimeter of paper around the image -apply a layer of the printed side of the paper with a flat and soft brush, caress first horizontally then vertically, waiting for an hour between layers -Repeat for at least three or four coats of gel -When the last layer is dry, well cut paper for a decoupage project -soak with warm or hot water at the back of the paper with a brush -with slight movements rub with fingers to remove the white paper, leaving only the image transfer -apply the image on the fabric, apply the gel on the back of the image and the fabric in the space that will keep the image -with fingers adhere the image as in normal cutting, the center outwards -apply another layer of gel on the whole image, trying not to escape to the fabric -when dry, preferably overnight, wash by hand or in a washing machine on low heat without wringing.