Steve from Minecraft - Wall Sculpture - Download, Print and Make Your Own

Sold by PaperHenDesigns

This is a digital file

$5.95
Get Shipping Estimate
$5.95
In stock
Digital download

Features
Digital
Made in Washington, United Kingdom

Item details

This is Steve from Minecraft appearing out of your wall! Steve is the main protagonist of the famous video game Minecraft. Having super strength he can carry over 400 000 tons of materials and can break solid rock with his punches. As an alchemist, Steve can craft many types of potions. As a master builder, craftsman and builder he is able to use limited tools to build buildings from castles to gigantic skyscrapers.
Having this sculpture of Steve on your wall makes a real statement about you!

WHAT YOU'RE BUYING
You're purchasing a pattern/template with instructions to allow you to build a 3D low poly Steve wall sculpture from card. There are two versions of the pattern included in the download: a textured pattern which can be printed in colour; and a plain pattern which you can then paint if you so wish. I've included pictures above which shows the completed sculpture using the textured pattern and one built from white card.
The size of Steve is approximately 45cm x 36cm x 25cm (height,width,depth). You can scale down the sculpture if you wish and instructions are provided to enable you to do this, although assembly may be more difficult if scaled down too far.
The pattern and instructions are in the form of a digital instant download PDF file.

WHAT YOU'LL NEED
To build the sculpture you'll need a printer, 20 pages of card (craft card or recycled card), scissors and glue. The pattern is compatible with A4 and US Letter sizes.

HOW LONG WILL IT TAKE?
There are only 52 parts to the sculpture so building it (cutting, folding and gluing) should take no more than 9 hours. It's therapeutic to build and you can do so while listening to your favourite music!

IS IT DIFFICULT?
Medium level difficulty so some experience of papercraft is better, but anyone can build the sculpture - you just need care and patience.

WHAT ABOUT HELP?
Step by step instructions are included in the download for those who want them.
There's some basic instructions (for beginners in papercraft) which covers things like tools and material, how to read the pattern, skills such as cutting out, scoring and folding and gluing.
As well as the basic instructions there's assembly instructions and tips which guide you through how to make this specific project.

You can also find a video on the basic instructions on how to build our models at https://youtu.be/i5SB12ewY5w

** And of course I also provide free, one-to-one help as well! If you're stuck or want advice then just ask - I'll usually get back to you within a few hours. **




Please note that the pattern is for personal use only.

Just ask if you have any questions.

Thanks for looking and enjoy building your new sculpture!
Christine


FAQs

A: You'll get a downloadable PDF file which contains the pattern, build instructions in English and picture of the completed model.

A: Quite easy really - provided you take your time and enjoy it. The instructions show the best order to build things and the pattern itself is designed to be as intuitive as possible. I also include some 'getting started' instructions for beginners which explain how to read the pattern, how to cut out, score and fold them. There's also a getting started video on my YouTube channel (https://youtu.be/i5SB12ewY5w) which gives some additional handy tips.

The description in each shop listing shows how many parts the model has and gives an estimate of the build time. A rule of thumb I use is to say that each part takes about 10 minutes (to cut out, score, fold, glue and assemble) so a mask with 6 parts, for example, could be done in about an hour once it's been printed.

A: Yes, each paper model is usability tested by me before being listed in my shop. I print, cut out, score, fold and assemble each design to make sure that it's easy as possible to build. Usually each model goes through a couple of revisions before being listed. I also write the instructions after building the model so that I can highlight the best order to make it. Take a look at my YouTube channel (https://youtu.be/7a6vKcRnydA) to see how I design the models.

Printer. If your printer does not support printing onto cardstock then you'll need to use the pattern as a template Scissors or craft knife Scoring tool (e.g. dried ball point pen, paper clip...) Ruler

A: Yes. The pattern should be printed actual size and will work for both US Letter and A4. There's also a check line on each page to make sure that your pattern is the correct size.

Craft card/paper either A4 or US Letter size (210 gsm / 280 micron / 110lb index / 80lb cover or thicker preferred) or reclaimed card to be ECO friendly School/PVA white glue

A: Most of the models are not coloured. This allows you to decorate it in any way you please. I try to show some design ideas in each listing to help you. Some models are textured though so you'll need to print those on a colour printer. The textured models also contain the pattern in non-textured form so you can even decorate that if you wish.

A: Definitely acrylic paints; either liquid craft ones or artist acrylic paints in tubes are by far the best. They offer a good range of colours and are cheap to buy. Acrylic spray paint can also be used if you want a quick and uniform finish but you need a well ventilated and contained area for spraying.

A: Either. The pattern is designed to fit an adult male head (and to be large enough for 99% of the population) but if you want to scale it for a small child then you simply reduce the scale when printing. The instructions describe how to do this in more detail. All of the masks have a headband template as well to give you a snug fit.

A: You'll get a downloadable PDF file which contains the pattern, build instructions in English and picture of the completed model.

A: Quite easy really - provided you take your time and enjoy it. The instructions show the best order to build things and the pattern itself is designed to be as intuitive as possible. I also include some 'getting started' instructions for beginners which explain how to read the pattern, how to cut out, score and fold them. There's also a getting started video on my YouTube channel (https://youtu.be/i5SB12ewY5w) which gives some additional handy tips.

The description in each shop listing shows how many parts the model has and gives an estimate of the build time. A rule of thumb I use is to say that each part takes about 10 minutes (to cut out, score, fold, glue and assemble) so a mask with 6 parts, for example, could be done in about an hour once it's been printed.

A: Yes, each paper model is usability tested by me before being listed in my shop. I print, cut out, score, fold and assemble each design to make sure that it's easy as possible to build. Usually each model goes through a couple of revisions before being listed. I also write the instructions after building the model so that I can highlight the best order to make it. Take a look at my YouTube channel (https://youtu.be/7a6vKcRnydA) to see how I design the models.

Printer. If your printer does not support printing onto cardstock then you'll need to use the pattern as a template Scissors or craft knife Scoring tool (e.g. dried ball point pen, paper clip...) Ruler

A: Yes. The pattern should be printed actual size and will work for both US Letter and A4. There's also a check line on each page to make sure that your pattern is the correct size.

Craft card/paper either A4 or US Letter size (210 gsm / 280 micron / 110lb index / 80lb cover or thicker preferred) or reclaimed card to be ECO friendly School/PVA white glue

A: Most of the models are not coloured. This allows you to decorate it in any way you please. I try to show some design ideas in each listing to help you. Some models are textured though so you'll need to print those on a colour printer. The textured models also contain the pattern in non-textured form so you can even decorate that if you wish.

A: Definitely acrylic paints; either liquid craft ones or artist acrylic paints in tubes are by far the best. They offer a good range of colours and are cheap to buy. Acrylic spray paint can also be used if you want a quick and uniform finish but you need a well ventilated and contained area for spraying.

A: Either. The pattern is designed to fit an adult male head (and to be large enough for 99% of the population) but if you want to scale it for a small child then you simply reduce the scale when printing. The instructions describe how to do this in more detail. All of the masks have a headband template as well to give you a snug fit.



    Reviews
    No reviews yet

More from this seller

Digital downloads
File delivery
Your files will be available to download once payment is confirmed. Here's how.

Payments
Secure options
  • Visa
  • Mastercard
  • American Express
  • Discover
  • Paypal
Etsy Studio keeps your payment information secure. Etsy Studio shops never receive your credit card information.