Low Poly DIY T90 Tank Paper Model, Create Your Own 3D Papercraft Tank, 6.5 Feet Long PaperCraft, Origami Tank

Sold by PaperModelGuru
(4)

This is a digital file

$25.40
Get Shipping Estimate
$25.40
In stock
Digital download

Features
Digital
Made in New Delhi, India

Item details

Have you ever seen a 6+ feet long Main Battle Tank made completely using PAPER and GLUE?

The good new is that now you can build one on your own.

The PDF template turns into a 6.5 feet long T90 Tank

This requires you to have a little Paper Modeling experience because it took me more than 300 hours to completely build this detailed piece of art!

When you purchase your 3D T90 Tank DIY Paper Model, here is what you will receive:
1. 180 Page Digital Template consisting of all the parts needed to create this giant Paper Model
2. 26 Page of Instructions
3. Level of Difficulty = Experienced
4. Age Group = Recommended for teens to adults
5. Time to create = More than 300 hours on average

~ Finished Length (from fuel tank drum to cannon tip): 183 cm / 72 inches
~ Finished Width: 67.5 cm / 26.5 inches
~ Finished Height (to the tip of the antenna): 55 cm / 21.6 inches

Here is a list of the tools you will need:
~ A3 Paper Printer **
~ A3 Paper sheets of thick paper/card (280-300 gsm) **
~ Cutting Tool
~ Scoring Tool
~ Ruler
~ White Glue
~ Masking Tape

** or go to your local printing place, they are likely to have a wide range of paper in various weights. They will print it out for you. I used 280 gsm Natural Evolution Ivory sheet from Gruppo Cordenons and printed it on HP Indigo Machine.

--------------------------------------------
Looking for more great 3D Paper Crafts to create? Please visit my home page to view my full collection:
www.etsy.com/shop/PaperModelGuru


FAQs

Yes, but it also depends on the level of difficulty of the DIY kit that you're interested in. It would be great if you contact me in case you are not sure about the level of difficulty VS your experience in paper modeling. The Paper Model of Iron Man's helmet and Camel Head Trophy is for beginners to experienced folks. However, I wouldn't recommend the T90 Paper Model for beginners as it is a very detailed Paper Model and requires some paper modeling experience.

Yes, I frequently conduct paper modeling workshops for kids of age group 8 years and above and they do good: Refer this video from one of my workshops: https://www.youtube.com/watch?v=78MfsAWkXHc&t=5s But it still depends on the DIY kit that you are downloading. The Iron Man's helmet & Camel Head Trophy is something that an 8 years old can easily handle.

■ Printer or your local print shop ■ A3 Paper (280-300 gsm) ■ Cutting tool ■ Scoring tool (the dull side of a craft knife, dried out ball pen, etc.) ■ Ruler ■ White glue ■ Masking Tape ■ Curiosity to learn

Paper: I usually mention this detail on the PDF file that you download. But generally speaking, the paper varies from 180GSM to 300GSM depending on the paper craft that you want to make. Glue: Quick drying white glue! (mundane quick drying wood glue, or Aileen's, or Elmer's, or Mod Podge, or Indian Fevicol and so on). I wouldn't recommend: glue sticks nor transparent liquid glues.

Go to your local copy store / printer shop with a thumb drive. They usually have a wide range of paper of various weights. They will print your template for you.

In this shop, you will find PDF patterns you can turn into paper Models. Nothing physical will be sent to you. After a few seconds of your purchase, you will be able to download a PDF File OR a word document that contains URL of my Google Drive and step-by-step instructions that will help you to download the actual files for making the paper model. (This is because Etsy wouldn’t allow me to upload files that are more than 20MB whereas T90 files are more than 100MB big) Do not worry, your money is safe and before you know it, you will download the official DIY Templates for the paper model that you're interested in Feel free to contact me in case you have any confusion, I'll be happy to help :)

I do, as long as none of the files (DIY Templates of the paper craft) has been downloaded.

No, you can print and build as many as you like. A separate model must be purchased if your friend wants to build his own papercraft! But, please DO NOT share or publish the files and not to use them for profit of any kind. Don't mess with the copyright law.

Yes, you can sell a finished Paper Model. As for the template and the instructions, they are protected under copyright law. They are provided for the sole purpose of your personal pleasure. They are NOT to be shared, published, copied, sold or distributed in any way without my consent.

Yes, but it also depends on the level of difficulty of the DIY kit that you're interested in. It would be great if you contact me in case you are not sure about the level of difficulty VS your experience in paper modeling. The Paper Model of Iron Man's helmet and Camel Head Trophy is for beginners to experienced folks. However, I wouldn't recommend the T90 Paper Model for beginners as it is a very detailed Paper Model and requires some paper modeling experience.

Yes, I frequently conduct paper modeling workshops for kids of age group 8 years and above and they do good: Refer this video from one of my workshops: https://www.youtube.com/watch?v=78MfsAWkXHc&t=5s But it still depends on the DIY kit that you are downloading. The Iron Man's helmet & Camel Head Trophy is something that an 8 years old can easily handle.

■ Printer or your local print shop ■ A3 Paper (280-300 gsm) ■ Cutting tool ■ Scoring tool (the dull side of a craft knife, dried out ball pen, etc.) ■ Ruler ■ White glue ■ Masking Tape ■ Curiosity to learn

Paper: I usually mention this detail on the PDF file that you download. But generally speaking, the paper varies from 180GSM to 300GSM depending on the paper craft that you want to make. Glue: Quick drying white glue! (mundane quick drying wood glue, or Aileen's, or Elmer's, or Mod Podge, or Indian Fevicol and so on). I wouldn't recommend: glue sticks nor transparent liquid glues.

Go to your local copy store / printer shop with a thumb drive. They usually have a wide range of paper of various weights. They will print your template for you.

In this shop, you will find PDF patterns you can turn into paper Models. Nothing physical will be sent to you. After a few seconds of your purchase, you will be able to download a PDF File OR a word document that contains URL of my Google Drive and step-by-step instructions that will help you to download the actual files for making the paper model. (This is because Etsy wouldn’t allow me to upload files that are more than 20MB whereas T90 files are more than 100MB big) Do not worry, your money is safe and before you know it, you will download the official DIY Templates for the paper model that you're interested in Feel free to contact me in case you have any confusion, I'll be happy to help :)

I do, as long as none of the files (DIY Templates of the paper craft) has been downloaded.

No, you can print and build as many as you like. A separate model must be purchased if your friend wants to build his own papercraft! But, please DO NOT share or publish the files and not to use them for profit of any kind. Don't mess with the copyright law.

Yes, you can sell a finished Paper Model. As for the template and the instructions, they are protected under copyright law. They are provided for the sole purpose of your personal pleasure. They are NOT to be shared, published, copied, sold or distributed in any way without my consent.



Reviews
Average review
(4)
This is one of the best paper model I've come across . Hats off to Papermodel guru for creating this master piece. Easy to create by following simple instructions provided in how to guide
Mar 14, 2018 by Rahul Mahajan
This turns out to be an amazing exercise and i loved the final product. The instructions were pretty detailed and helped to create the product.
Mar 13, 2018 by ankur
WOW! A great and, by size alone, impressive model of a T90 MBT. Designed to be printed on A3 sized card (difficult to find in the States), the nature of the digital file opens itself to "scaling" and changing the size of the model. Printing at 92% ( 1/8 scale) will allow you to successfully print on 11x17 (tabloid) sized card. Printing at 50% (1/12th scale), while still presenting a sizable model of over 3 feet in length, will allow the builder to print on 8.5x11 or A4 sized stock, putting this project in the realm of virtually every home printer. Unique construction of smaller boxes making up major components looks to speed assembly, but be prepared: it's a big project and a long road, but a stunning model is at the end.
Mar 10, 2018 by Mark
Jan 21, 2018 by Todd Johnson

Digital downloads
File delivery
Your files will be available to download once payment is confirmed. Here's how.

Payments
Secure options
Etsy Studio keeps your payment information secure. Etsy Studio shops never receive your credit card information.