Rustic Cumbrian Oak Longarm Ruler Stand with a Character Front Edge
Organize your Longarm Quilt Rulers or similar items Not suitable for the thinner rulers (3mm, 1/8 inch) used by quilters for marking and rotary cutting.
Ruler stand for displaying and controlling your long arm quilt rulers (5mm, 3/16 in). Suitable for most long arm quilt rulers used to control stitching on a long arm quilting machine.
Wooden Stand Only - Rulers not included!!
There are 3 slots each 6mm thickness - the front slot is slightly shorter than the full length of the stand. Unit is 28cm long by 11cm front to back by 2.4cm thick.
The front edge is fashioned from a split formed as the timber dried. The medullary rays in the oak are clearly displayed.
The stand is finished with OSMO PolyX Furniture Oil/Wax to give a satin finish which can be maintained with any furniture polish.
Please note that wood is a natural material and can move with change in temperature, humidity and sunlight. The stand is made from kiln dried wood so is suitable for normal centrally heated houses but may well crack further if placed over a radiator or in direct sunlight. Wood naturally darkens with age.
Wood sourced from "The Tree On The Hill" in Cumbria who aim to source local timber as much as possible, from windblown, dead or other trees felled for good reason.
Our quilting and embroidery accessories are also available from Fobbles our local Specialist Patchwork & Needlecraft workshop https://www.fobbles.co.uk/
You may also be interested in my wife's Longarm Quilting Business. She can quilt your patchwork tops using her Longarm Quilting Machine either by hand or under computer control. https://cumbrianlongarmquilting.co.uk/
Shipping in UK is Royal Mail Small Parcel 1st Class. Shipping Overseas is Parcelforce Worldwide Express 48