Our feedback speaks for itself. Check our our review page to see how much our customers LOVE our turners!
If you make glitter tumblers with epoxy, these are a MUST HAVE item! It slowly rotates, helping ensure an even, dripless coat of epoxy to cover all that gorgeous, sparkly glitter!
Our turners arrive to you ready to use. They are pre-assembled and there is absolutely no assembly required, unless you need to change the rods out for football sizes. Simply open the box, pull machine out, plug in and flick the switch to see it rotate!
You will likely notice that the metal collar (the metal piece that is in the base) is loose. Do not panic! It is designed that way. If it were rigid, the turner would not turn the rods. We use a special lubricant on the collar, which may be noticeable. It is NOT glue. Your cuptisserie is NOT broken if the collar is loose. To use your turner, simply insert the rod all the way into the collar/base. Here is a handy video to show you how: https://youtu.be/NidtkUQi3Vg
THE PROCESS.... • Our sturdy wooden base is made from smooth Select Pine, not cheap lumber. The pine is carefully and meticulously checked for flaws: if it is warped, defective, cracked, or does not sit flat, it does not meet our standards and we will NOT use it. • Once the pine passes our strict quality control assessment, it is then carefully measured, cut, glued, screwed, sanded (no rough edges allowed!), and drilled with a heavy duty machine shop drill, to create professional holes and grooves for our machine to fit into while in use. • We then personally test each turner for a period of time to ensure it is level, turns well, and that the motor runs smoothly, without mechanical defects. There have been times during testing that a motor has been found defective and we have opted to replace it with another before shipment (and then test the replacement before mailing)....because we pride ourselves on quality workmanship and would never knowingly send a damaged or malfunctioning unit.
As you can tell, our turners are a true labor of love!
Our base design is one-of-a-kind and it keeps the tumblers snugly attached while rotating, but allows for easy removal once tumblers have dried.
The compact design makes it incredibly easy to both use and store while not in use, as it does not take much space at all.
We have located some sellers trying to duplicate/sell our original design...we have thoroughly designed ours from scratch, and continuously test it and improve upon it to ensure the BEST possible setup for our customers--please be aware that imitations will NOT work the same, as we have several secret, key components in our design that make us unique.
No sneaky upcharging on shipping to profit! Compare our prices with others--including shipping--to find ours is 99% of the time most affordable overall, and we offer attachments whereas others expect you to pay more on your own for them. Don't let your bottom line be inflated...you know value when you see it.
We ship via Priority mail, which includes insurance.
Your choice of either: 1 green foam with a non-slip mat strip to wrap around the foam (will need large rubberbands to hold it into place) OR 2 soft foam footballs (one small, one large).
--->These are made to order, and will ship separately from any other items ordered from our shop.
You may hear the subtle hum of the motor at times, and that is entirely normal :) Many customers report these are quiet as can be.
MAINTENANCE... • Feel free to add a drop or two of oil at the base of the rod after extended use, to ensure longer life and smooth turning.
See a short video here: https://youtu.be/Owcrert9gPI
See a how-to install your interchangeable rods video here: https://youtu.be/NidtkUQi3Vg
Your satisfaction is important to us----and we know our turners well——-so we are happy to help with any technical questions you may have :)
-------> At this time, we are discontinuing our international shipments as a general rule. However, we may agree to ship internationally at our discretion. Be aware that there are differences in electrical currents and voltages, so customers are responsible to know their need for adapters. We will NOT replace or refund any turners that are shipped overseas for ANY reason. There is a high risk of a blown/burnt out motor from the voltage differences, so we cannot and will not be responsible for our turners sent to international addresses. Thank you for understanding.
Electric Cup Turner for Making Glitter Epoxy Tumblers, Cuptissorie, Mug Holder Craft Stand, Glitter Application Helper, Gift for Crafters
I LOVE my cuptisserie!! It came quicker than expected and I am completely happy with how quiet it is as well as how well it works. I may have to order a second one!
1 day ago by jnishi1
Love this! Thank you. It works perfectly.
2 days ago by Amy Bender
I had trouble at first and the seller messaged me back super fast. There's great how to video she's made I was directed to, and I figured out my mistake setting it up. After that it's been smooooooth sailing. It's very, very quiet. No bumping around. It would be a good idea to insert a note directing people to the set up video on seller's etsy page. At least, for new cup makers like me :)
4 days ago by sonyaruss
Worked well for about two weeks and then the rod started to slide out as it turned and it would make a loud screeching. I’m talking LOUD! It was so stressful! We tried oiling it, propping the turner, repositioning it. Nothing worked. Finally I emailed the seller for advise, but she never returned my email. We ended up taping the rod with electrical tape and moving it to the garage due to the intolerable noise. If I knew this is what I would be working with I would have never spent the money on it.
I purchased another turner that had rave reviews on its quiet gears and its amazing. I would definitely do your homework before purchasing a turner. I do not recommend this turner.
5 days ago by NICOLE MARETT
I’m so happy with this product. After receiving and using this turner I decided I wanted another one and went with another seller on Etsy because it was cheaper with shipping. The product was essentially the same set up but the quality was much, much poorer. I have never had any issue with this turner. In contrast I placed a cup on my new turner and the entire mechanism fell because the housing is loose and unsecure. Will never order from that seller again and I wish I had reordered from Melissa from the start. I wish she had a 2 cup turner!