WebbWood™ HD is very similar to DymondWood® or Dymalux®, but without impregnated phenolic resin. It has approximately 37 plys per inch
These blocks have two machining holes approximately 6mm deep on one flat surface. They were originally intended as blanks for creating turkey calls, with most of the center to be machined out. One hole is approximately 20mm from one side, the other 25mm from the other side, and are both roughly central (about 55mm each way) from the ends.
The top of the blocks has marks and scratches from the pressing process. After sanding & bearing in mind the machining holes, the blocks have usable dimensions of at least 105mm x 105mm x 18mm.
This material is quite dense (since it is formed under great pressure), but it does cut well with sharp tools & gives great results when polished.
If you purchase multiples of this item, or combine it with other sizes of block, I'll find the most economical shipping method and refund the shipping overages above cost + packing.