Rush Order Vinyl Decal Listing

Sold by AceDesignsStore
(1)
$2.77+
+ $11.78 shipping
$2.77+
+ $11.78 shipping
Made to order
Preparation takes 2-3 weeks
Arrives from United Kingdom

Features
Handmade
Made in Maidstone, United Kingdom

Item details

***This is the listing for rush orders (where available)

The reason that this listing is a little more in price is that rush orders require me to work when I normally wouldn't be, thus taking time away from my family of 5.

I am happy to accommodate short notice orders where it is possible & prior to a conversation that I have agreed to your lead times. This is not always guaranteed due to stock levels etc so please only select this leading once we have spoken***


Are you a DIY bride? Would you like to put your own mark on items for your wedding? Then you're in the right place!

For personalised wedding hangers, glasses & signs then I'm your go to girl.

Please select the item you would like with the information you'd like. ie for hangers please word your message as -

HANGERS
NAME
ROLE
DATE
COLOUR

GLASSES
NAME
ROLE
COLOUR

Any text/phrase is available these are just the most popular selections.

CUSTOM WORK - please discuss before purchase so that I can give you the best quote for your tailored order.

For vinyl decals please tell me the details above for EACH set that you'd like. For more than one set (ie 3 bridesmaids, please order 3 sets & give details for each of the three) Any problems, please drop me a message & I will be happy to help you!

As standard decals for hangers are approx 0.50 inches in height for role/date, 2inches in height for name & 3 inches in length for all of the above. For glasses they are approx 3" x 2". Other sizes are available but must be measured correctly by yourself. A font suitable for your wording & item may be selected & sent as standard. If you have a specific font in mind, please let me know before paying as most fonts require a commercial licence (some of which I hold).


FAQs

Yes I do! The prices vary on your destination & weight of your order so please get in touch before paying for your order for a tailored quote. This avoids overcharges.

I do offer custom orders, please drop me a message with your text, sizes & colours & I'll come back to you with a tailored quote.

Due to the quick production & packaging process - time to time I forget to enclose instructions 😣 So here they are! 1 Clean the area thoroughly with rubbing alcohol or soap and water. 2 Prepare the sticker for application by firmly rubbing a squeegee or credit card across the transfer tape. This removes any air bubbles that may have formed and makes the sticker cling to the transfer tape. 3 Peel the white/clear tape off the sticker. If the sticker clings to the backing, slowly replace the paper backing and repeat Step 2. 4 Slowly lower the sticker on to your item & rub it firmly in place with a credit card. 5 Slowly peel the transfer tape off at an angle. Voila! Repeat step 4 if your decal doesn't stay in place.

Iron needs to be at the lowest setting just before steam! Place image with the clear carrier sheet facing up. Place a sheet of baking paper over the image with the shiny side up. With your iron place a little pressure evenly across the design. Hold for approx 15 secs keeping even pressure over the decal. Remove baking paper. Gently lift off the clear carrier sheet starting with one corner. If the plastic sheet comes away easily your work is done. Sometimes it takes a couple of attempts for the whole image to be transferred. If it doesn’t come away, try another corner. If it's still lifting reapply the iron & try again. Once the item has been transferred gently go over your item once more with the baking paper still covering your work

Do not wash any garments that have been heat printed with vinyl for at least 24 hours following application. The adhesives are activated by the heat of your press which “melts” the adhesive into the fabric. The adhesive needs time to harden again without interruption. This ensures the graphic is durable. Do not dry clean any heat applied graphics. They just aren’t cut out for the harshness of dry cleaning. Turn the garment inside out before washing. This protects the graphic (especially if it’s a printed graphic) from abrasions and damage as other items in the wash rub together during the cycle. Choose cold or warm water temperature settings for the wash. You don’t want the water to exceed temperatures of 178 degrees Fahrenheit. High temper

High temperatures can weaken the adhesives. Use a mild detergent. Do not use any “green” detergents. We also recommend that you stray from whiteners, bleach, fabric softeners, or any aggressive cleaning solutions. Dry on a low heat/tumble setting or hang dry. Just like in the wash, you don’t want to exceed temps of 178 degrees. With that being said, stick to tumble dry settings or low heat settings. If possible, hang dry for the best results. Hang drying will minimalize wrinkles and potential heat damage. Do not iron directly on a heat transfer design. Doing so will never end well. The high heat will either melt the vinyl or burn the adhesive. Both will ruin the garment.

Please be aware that items not pressed correctly may damage during the wash cycle.

Yes I do! The prices vary on your destination & weight of your order so please get in touch before paying for your order for a tailored quote. This avoids overcharges.

I do offer custom orders, please drop me a message with your text, sizes & colours & I'll come back to you with a tailored quote.

Due to the quick production & packaging process - time to time I forget to enclose instructions 😣 So here they are! 1 Clean the area thoroughly with rubbing alcohol or soap and water. 2 Prepare the sticker for application by firmly rubbing a squeegee or credit card across the transfer tape. This removes any air bubbles that may have formed and makes the sticker cling to the transfer tape. 3 Peel the white/clear tape off the sticker. If the sticker clings to the backing, slowly replace the paper backing and repeat Step 2. 4 Slowly lower the sticker on to your item & rub it firmly in place with a credit card. 5 Slowly peel the transfer tape off at an angle. Voila! Repeat step 4 if your decal doesn't stay in place.

Iron needs to be at the lowest setting just before steam! Place image with the clear carrier sheet facing up. Place a sheet of baking paper over the image with the shiny side up. With your iron place a little pressure evenly across the design. Hold for approx 15 secs keeping even pressure over the decal. Remove baking paper. Gently lift off the clear carrier sheet starting with one corner. If the plastic sheet comes away easily your work is done. Sometimes it takes a couple of attempts for the whole image to be transferred. If it doesn’t come away, try another corner. If it's still lifting reapply the iron & try again. Once the item has been transferred gently go over your item once more with the baking paper still covering your work

Do not wash any garments that have been heat printed with vinyl for at least 24 hours following application. The adhesives are activated by the heat of your press which “melts” the adhesive into the fabric. The adhesive needs time to harden again without interruption. This ensures the graphic is durable. Do not dry clean any heat applied graphics. They just aren’t cut out for the harshness of dry cleaning. Turn the garment inside out before washing. This protects the graphic (especially if it’s a printed graphic) from abrasions and damage as other items in the wash rub together during the cycle. Choose cold or warm water temperature settings for the wash. You don’t want the water to exceed temperatures of 178 degrees Fahrenheit. High temper

High temperatures can weaken the adhesives. Use a mild detergent. Do not use any “green” detergents. We also recommend that you stray from whiteners, bleach, fabric softeners, or any aggressive cleaning solutions. Dry on a low heat/tumble setting or hang dry. Just like in the wash, you don’t want to exceed temps of 178 degrees. With that being said, stick to tumble dry settings or low heat settings. If possible, hang dry for the best results. Hang drying will minimalize wrinkles and potential heat damage. Do not iron directly on a heat transfer design. Doing so will never end well. The high heat will either melt the vinyl or burn the adhesive. Both will ruin the garment.

Please be aware that items not pressed correctly may damage during the wash cycle.


Reviews
Average review
(1)
Really pleased with the logo I requested for my Monat launch party. Beautifully done & arrived in plenty of time. Thank you so much.
Mar 28, 2018 by kimlisa69

Shipping & policies
Preparation takes 2-3 weeks
Arrives from United Kingdom
Estimated Shipping
Shipping to
Zip or postal code
Estimated shipping times
United Kingdom 3-5 business days
United States 2-5 business days
Australia, New Zealand and Oceania 2-5 business days
I'll do my best to meet these shipping estimates, but cannot guarantee them. Actual delivery time will depend on the shipping method you choose.
Customs and import taxes
Buyers are responsible for any customs and import taxes that may apply. I'm not responsible for delays due to customs.

Payments
Secure options
Etsy Studio keeps your payment information secure. Etsy Studio shops never receive your credit card information.

Returns & exchanges
I don't accept returns, exchanges, or cancellations
But please contact me if you have any problems with your order.