MAKE YOUR DESIGNS SPARKLE. Add the sparkle of glitter effects to any logo with JSI Perforated Glitter heat transfer film. Perfect for dance and cheer wear or anywhere you need some extra shine. Glass like fragments make this the ultimate in glitter transfer films. JSIsigns buys our glitter direct from Korean manufactures and pass the saving on to our customers.
Cutting glitter tips: Glitter can be inconsistant from batch to batch and color to color. Therefore, always do test cuts for best weeding results. You should always see a light scrtach in your liner after you weed out your test cut. We often recommend double cutting if you cutter is accurate enough to go back to the exact same spot. This helps see the weed lines when weeding your pattern. Glitter HTV is very different than standard HTV like PerfecPress and Easyweed. Since glitter has a rough surface, completly different adhesives are used to adhere the glitter to the liner. Some glitters weed easier than others based on the amount of glue used to adhere the glitter to the liner. Also some glitters require adding a white base to the holtmelt adhesive to make the glitter opaque enough for dark garments. Some colors of glitter require different amount of glitter flakes to make enough coverage for the color to "pop". Glitter flake do not always stand straight up in uniform direction, we call this the grain of the flakes. You can experience different cutting cutting into the grain or with the grain. All of these are great reason to do test cuts most importanly with glitter htv Also, if your plotter allows you to change the thickness of the blade, using a 60 degree blade will make the job much easier. As always, you should do a test before sending your whole job, and adjust your pressure/speed from there. If you are unfamiliar on performing a test cut, there is a guide here.
Heat Application: Pre-heat 2/3 seconds Time: 10-15 Seconds Temperature: 325 F / 160 C Pressure: Firm Peel: warm Adheres To: 100% cotton 100% uncoated polyester poly/cotton blends Specifications: PVC composition Pressure sensitive backing Glitter rough finish 325 Microns/12.8 Mils 45/60 blade Can be used as top layer (Not recommended to be layered on top of itself) Washing Instructions: Do not dry clean Machine wash WARM / mild detergent Dry at normal setting No chlorine bleach Wait 24 hours before first wash
Mar 5, 2018 by Dana
Super Fast Delivery. Great Company to do business with.