AVinylDesign3 is taking a short break
Note from seller

Reindeer Deer Monogram Heat Transfer Decal DIY

Sold by AVinylDesign3
+ $1.00 shipping
+ $1.00 shipping

Made in Morgantown, Kentucky

Item details

Most orders can be customized with any name, monogram, color or size. When purchasing something please make sure you leave all information needed to process your order. Font, Color, Size, Name, Monogram.. Anything that applies to your item.

A Heat Transfer is just the Transfer its self. You will have to apply it to any shirt or fabric you would like. If you are purchasing a multicolored heat transfer it is in separate layers you will have to apply one at a time. One color heat transfers are all on the same sheet ready to apply. Heat Transfers best apply to Cotton, Polyester and Poly-Cotton Blends but you may apply to many more things. You do NOT need a heat press to apply these, you can use any good household iron on its hottest setting. (INSTRUCTIONS ARE BELOW)

Decals have no color background. The word/picture is the decal. Decals will come ready to apply. Most are one color but if you purchase one that is multicolored it WILL come as one decal already done for you and ready to apply. You can apply these to any clean smooth surface. A textured surface many not last as long as it wont be able to stick down through out the decal. (INSTRUCTIONS ARE BELOW)

Decals, heat transfers and other items like this will be sent standard mail by USPS. They will not include tracking and can take up to 8 days to arrive after being mailed. If you want a tracking number or an order to be expedited please upgrade your shipping as you are checking out. I will not be able to tell you where your order is after it has been mailed so if this is important to you please upgrade your shipping.

Holiday orders and orders placed around any holiday season are encouraged to order sooner. Turnaround times may slow down some due to the high volume of orders being worked on. And USPS may take longer to deliver your package due to them having a higher volume of packages.

Heat Transfer Instructions
**If your decal is multiple layers please take apart and apply ONE layer at a time.
Included with your heat transfer is a piece of parchment paper to go over your transfer while applying so you do not melt and ruin anything.
1.Preheat Iron to hottest setting.
2. Place decal where you would like it to be transferred. Place the transfer on the clothing item and the slick side up.
3.Cover transfer with parchment paper or your iron will melt the plastic.
4.Firmly place iron on top of and hold for 10-20 seconds. If your transfer is larger than your iron lift and move iron to another spot and repeat process until all of the decal has been pressed. You do NOT want to move the iron around as this may cause something to smear.
5.You need to SLOWLY peel off the plastic to ensure you have applied all the transfer well. If a part tries to come up you need to replace the plastic sheet and the parchment paper and go over your transfer again.
If your transfer is only one layer than you are done. If you had two layers or more you need to be sure to remove all parchment paper and clear plastic sheet before you lay down your next layer. After laying down your next layer repeat steps and apply each layer the same way.

Decal Instructions
Make sure all surfaces you are applying to are clean and dust free.
Do not use Windex or any other cleaners like that as they leave a film and can cause the decals not to stick very well.
Cups or any thing you are required to wash often should be hand washed to make your decals last longer and look better.
1. Lay decal facing down and slowly peel off the white paper backing.
2. Place decal on surface and gently rub it down all over. I usually stick the middle of the decal down first and work with one side at a time so I don't get any air bubbles. (But when placing decals on car windows and such the bubbles will go away after a few days due to the temperature changes, so don't worry if you have some bubbles in there.)\
3. Slowly peel the clear transfer tape off after your decal is pressed down good all over. Peeling it straight back usually helps it to let go of the decal better. Peel slowly just in case a part of the decal isn't down good so you don't tear your decal.

No reviews yet

Shipping & policies
Preparation takes 3-5 business days
Arrives from the United States
Estimated Shipping
Shipping to
Zip or postal code

Secure options
Etsy Studio keeps your payment information secure. Etsy Studio shops never receive your credit card information.

Returns & exchanges
I gladly accept cancellations
Request a cancellation within: 1 hour of purchase
I don't accept returns or exchanges
But please contact me if you have any problems with your order.