Knockdown Stitch Rectangle 1x4" Embroidery Design Digital File - convo us if you need a different size or shape

Sold by JerosaDesigns
(2)

This is a digital file

$1.99
Get Shipping Estimate
$1.99
In stock
Digital download

Features
Digital
Made in St Louis, Missouri

Item details

This is hand digitized machine embroidery design.

You will receive this design in the following heights (tall) of item (convo us if you need a different size):

1x4 rectangle - stitches are 1mm apart. - We do different variances if this one doesn't work for your needs.

Available in the following formats:

VP4
VP3
PES
PEC
XXX
VIP
HUS
JEF
EXP
DST


Files are zipped and will be available for instant download as soon as payment clears.

1) Save Zipped file to your desktop or folder of your choice.
2) Locate the zipped folder that you save the file to.
3)To unzip all the contents of the zipped folder, press and hold (or right-click) the folder, select Extract All, and then follow the instructions.
4) You can save the unzip files to a new folder or location.

There are no returns, exchanges or refunds on these machine embroidery design files.
This is NOT a patch design. If you purchase this design please understand that you need an embroidery machine and software to use this.

You may stitch these designs out on items for resale, but may not copy, trade, share, or alter the design itself.

Thank you and enjoy!

Please contact us via Etsy if you have any issues with a design.

We also offer digitizing. To request a quote, convo us, include a pic, and let us know what you would like converted into an embroidery design.


FAQs

You can use buyers notes to add any colors selection for your order. Buyers notes can be found on the lower left hand side, after you add items to your cart.

1) Area should be clean and completely dry. 2) Peel bottom liner off vinyl. 3) Apply to area. Squeegee over with a bank card or applicator tool with overlapping strokes. 4) Gently peel back top liner starting at one corner. Tip: If vinyl starts to come off, lay area back down and squeegee over again. (extra-large vinyl can be applied with wet application)

1) Iron area where vinyl will go for 15-20 seconds using the highest, NON-steam setting. 2) Remove the wax paper liner, leaving top liner intact. 3) Place image, vinyl against the fabric, top liner side up, on to the pre-heated material. Place a thin cloth over it (I use a pillowcase), iron for 45-60 seconds. 4) Then turn material over and iron backside of garment for 20-30 seconds, applying medium pressure. 5) Let cool then remove top lining. You can also lay cloth back over it and re-iron after liner is removed to help secure down decal if enough pressure wasn’t applied in step 4. Tip: If decal starts to come off, lay area back down, cover with pillow case and iron again.

1) Pre-heat - Iron shirt where vinyl will go for 15-20 seconds using highest, NON-steam setting. 2) Remove wax paper liner, leaving top liner intact. 3) Place to the pre-heated material. Top liner side up, vinyl should be against fabric. Apply medium pressure with the iron for 45-60 seconds. 4) Repeat step 3 for any additional layers, stacking them one at a time. 5) Repeat for the other side of material. Let cool then remove top lining. If vinyl starts to come off, lay area back down, cover with pillow case and iron again. Tip: You cannot layer on top of the glitter vinyl -that must be the top layer!

You can use buyers notes to add any colors selection for your order. Buyers notes can be found on the lower left hand side, after you add items to your cart.

1) Area should be clean and completely dry. 2) Peel bottom liner off vinyl. 3) Apply to area. Squeegee over with a bank card or applicator tool with overlapping strokes. 4) Gently peel back top liner starting at one corner. Tip: If vinyl starts to come off, lay area back down and squeegee over again. (extra-large vinyl can be applied with wet application)

1) Iron area where vinyl will go for 15-20 seconds using the highest, NON-steam setting. 2) Remove the wax paper liner, leaving top liner intact. 3) Place image, vinyl against the fabric, top liner side up, on to the pre-heated material. Place a thin cloth over it (I use a pillowcase), iron for 45-60 seconds. 4) Then turn material over and iron backside of garment for 20-30 seconds, applying medium pressure. 5) Let cool then remove top lining. You can also lay cloth back over it and re-iron after liner is removed to help secure down decal if enough pressure wasn’t applied in step 4. Tip: If decal starts to come off, lay area back down, cover with pillow case and iron again.

1) Pre-heat - Iron shirt where vinyl will go for 15-20 seconds using highest, NON-steam setting. 2) Remove wax paper liner, leaving top liner intact. 3) Place to the pre-heated material. Top liner side up, vinyl should be against fabric. Apply medium pressure with the iron for 45-60 seconds. 4) Repeat step 3 for any additional layers, stacking them one at a time. 5) Repeat for the other side of material. Let cool then remove top lining. If vinyl starts to come off, lay area back down, cover with pillow case and iron again. Tip: You cannot layer on top of the glitter vinyl -that must be the top layer!


    Reviews
    Average review
    (2)
    stitched out great ! !
    Dec 22, 2017 by Demi Gil
    The customer service is outstanding and the stitch turned out great! Will definitely shop here again and recommend to others! Thank you! 👍
    Dec 16, 2017 by Thalleen

Digital downloads
File delivery
Your files will be available to download once payment is confirmed. Here's how.

Payments

We accept PayPal, Credit Cards or Etsy gift cards.


Returns & exchanges

If you are unhappy with your purchase, please return the item within 7 days for a full refund, minus shipping charges. All returns must be received in original undamaged/unused condition.


Additional policies

If there is any problem with your order, please contact me so we can work on a resolution.

Also, contact me before leaving neutral/negative feedback as your satisfaction really does matter. Thank you for your business!