If you're looking for a toggle button that will finish your piece of work with a nice woodland style, antler buttons may be just the thing you need. These buttons are made from natural whitetail deer antler. They will each be cut to about 1 inch long, pre-drilled with a 3/32 inch hole, sanded, including the edges and washed with a mild detergent. Please specify if you would like them to be lightly buffed or left in their natural state. These are sold per 1 piece with the option to purchase additional buttons together. These are made to order. While we try to get orders filled as quickly as possible, we do ask that you allow three to five days for completion so they can be properly washed and dried, then buffed if needed. We have a limited supply of tips to make these buttons from. At this time we have a set amount of tips designated for these buttons. If you would like more than we have posted for availability, please contact us and we will see if we can fit your needs in a timely manner.
Antler is a natural material that grows in a very non-perfect, natural way. There will also be natural blemishes in the antler from rubbing on trees, sparing, etc. We can not guarantee the exact color of the button(s) you will receive. Antler after washing can range widely in color tones. We can also not guarantee the exact thickness but we do try to keep them as similar as possible. With antler having natural curves and sometimes random hard spots the thread hole may often look different on each side. One side will seem like an average button while the other side the holes are offset and imperfect. While I try to avoid this as much as possible it is virtually impossible to avoid it completely. The buttons shown in the photos are examples of the button(s) you will receive.
*These are not to be used on anything that is meant for a child. Antler is very hard and non-forgiving, causing it to be a potential choking hazard.