If you would like 2 or 3 different colors, buy a 3 sheet pack and send a note that you would like them to be different colors. We cannot mix regular and fluorescent colors.
Our HTV Heat Transfer Vinyl is an opaque colored heat transfer film designed for application to textiles. It features excellent weeding capability for detailed designs, hot peel for fast application and great opacity for multi layer jobs. For use on 100% polyester, 100% cotton, poly/cotton blends and uncoated nylon.
Features: Matte finish, soft feel, and great stretchability Pressure sensitive carrier is tacky to keep the finest of detail down during weeding PolyUrethane Composition, 3.5 mil thick
Heat Press Application Instructions • Cut in reverse • Weed excess material • Preheat garment for 2-3 seconds • Apply design at 305°F • Use medium pressure for 10-15 seconds • Peel carrier hot or cold
Home Iron Application Instructions • Set iron dial between Cotton and Linen • Cover design with Kraft paper or non-stick cover sheet • Place on flat, hard surface (ironing board not recommended) • Press iron with medium/firm pressure (do not slide iron) • Press each section of design for 10-15 seconds • If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds • Peel carrier hot or cold
* Actual sheet size is 12" x 14.75" ** The colors shown are a good representation but some variation is to be expected due to the way colors are rendered on screens