The T-21 was a heavy blaster, which had a fully automatic and was extremely precise. Nevertheless, enemies could be turned off over gigantic distances. Tank-escorted troops often wore T-21s.
A 3d printed kit is offered here, which was printed with a layer thickness of 0.2 mm and an infill of 20% from the material pla 1.75 mm. The top and bottom layers, as well as the outer walls, have a thickness of 1 mm. PLA is a biodegradable plastic that is made from renewable raw materials such as corn starch or sugar cane. It has very good mechanical-physical properties and unless special requirements are placed on the component to be used, such as extremely high strength values or high weather resistance for outdoor use, PLA has proven to be a reliable and well-printable material. In general, PLA is slightly harder and more brittle than ABS, coupled with a higher surface hardness.
The kit contains all the necessary parts to assemble the T-21 itself. The kit must be glued, ground and varnished. But you get a detailed and realistic 1:1 copy of the popular Sandtrooper Blastergewehrs, which is ideal for troopers with just under 2,000 grams of weight.