Сharacteristics: - Molds made from impact-resistant ABS plastic with a thickness of 1.5 mm (0.04 in), suitable for casting plaster and concrete - The set includes 3 pcs (12 forms each one)/ Total number of forms in set - 36 - Stone size 19.5 x 5 cm (7.7 '' x 2 '') Thickness 1 cm. (0.4 '') - 1 m2 (10,7 sq ft) = 102 stones - The area of the set = 0.35 m2 (3.3 sq ft) - The weight of the set of forms is 1.6 kg. (2.2 lb) - Endures fills 200+ (200-500)
Brief recommendations on working with forms:
- Lubricate the molds (with a very small amount of grease, literally rub for gloss) before casting. Use special greases or you can use a mixture of dies. fuel and engine oil 50/50 or lubricated with petroleum jelly. - For casting plaster 1.8-2 kg per 1 liter of water, for economy, you can also use sea or river sand up to 50% of the mass of gypsum. - For casting cement-sand mortars 1 part of cement + 2.5-3 parts of sand (+ 2.5 parts of aggregate (crushed stone, screening), for tiles more than 2 cm thick), 50 g of plasticizer per 10 kg of cement, 4.5 liters of water per 10 kg of mixture. Dye (iron oxide pigments) - up to 1% of the mass of the mixture.