Set of 6 Laser Cut Wood Stars that are Birch Veneer on one side and Walnut Veneer on the other side. These are cut from pre-finished Forest Stewardship Council Certified MDF Veneer Wood. The size of each star is 5.5 inches long by 5.5 inches wide by 1/8 inch deep.
Use as coasters, trivets, table mats, ornaments, or whatever you can come up with!
I would recommend lightly scrubbing the surface and edges with mild soap and a blue non-scratching scrubby or cotton rag, to remove the burn residue from laser cutting. Then the cut edges may be lightly sanded and finished with oil if you choose, but it is not necessary. After the oil dries, each side may be polished with a clean cotton towel.
Do not oil the edges if you plan to paint the stars. Spray painting works best after the wood has been scrubbed clean of burn residue.
Simply drill a hole and add a loop of string to use as an ornament. If you plant to glue the star to fabric or wood, the pre-finish must be sanded off with 80 grit sand paper in order for wood glue to adhere properly.