Siser Easyweed Stretch 15" x 1 yard

Sold by GSMFLORIDAGROUP
$9.80
Get Shipping Estimate
$9.80
In stock
Ships next business day
Arrives from the United States

Item details

GSM FLORIDA IS AN AUTHORIZED SISER DISTRIBUTOR SINCE 2006. Putting the “Performance” in Performance Wear. Performance wear has met its match! Siser EasyWeed™ Stretch delivers all the benefits of our EasyWeed™ heat transfer material and combines it with super stretchability to create one remarkable heat transfer material! The thinnest of any Siser material, EasyWeed™ Stretch has an ultra-matte finish and a soft hand that’s available in 16 popular Available COLORS BLACK, WHITE, RED, ORANGE, SILVER, YELLOW, ROYAL, SWEET MINT, NAVY BLUE, SEA GLASS, CORAL, GOLD, ROSE GOLD, PASSION PINK, BALERINA PINK, PURPLE BERRY. YOU ARE PURCHASING ONE YARD. PLEASE SEND US A MESSAGE VIA AMAZON MESSAGE AND LET US KNOW YOUR COLOR SELECTION. IN CASE WE WE MISS YOU WE WILL CONTACT YOU VIA MESSAGE. EasyWeed™ Stretch is laminated onto a pressure-sensitive carrier that allows for cutting and weeding detailed designs. SPECIFICATIONS PU composition • Pressure sensitive backing • Ultra matte finish • 85 Microns / 3.5 Mils • 45°/60° blade • Can be layered APPLIES TO 100% cotton • 100% polyester • poly/cotton blends • Lycra®/spandex • Leather HEAT APPLICATION Time: 15 Seconds • Temperature: 305° F / 150° C • Pressure: Medium-Firm • Peel: HOT or COLD CARE INSTRUCTIONS Do not dry clean • Machine wash WARM or COLD / mild detergent • Dry at normal setting • No chlorine bleach • Wait 24 hours before first wash EasyWeed™ Stretch is CPSIA Certified, so it's safe on garments for all ages!


Cricut®:

Blade: Standard
Setting: Iron-On
Silhouette Cameo:

Blade: Standard, 3
Setting: Heat Transfer Material (Smooth)
Speed: 8
Thickness: 6
Scan N Cut:

Blade: 2
Cut Speed: 1
Cut Pressure: 1
Roland GS/GX-24:

Blade: 45°
Gram Force: 60-70
Offset: .250
Speed: 30 cm/s
Graphtec:

Blade: 45°
Gram Force: 9-10
Tool: CB09U+0
Speed: 30 cm/s


Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier hot or cold


Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium/firm pressure for 15 seconds
• Peel carrier hot or cold


Reviews
No reviews yet

Shipping & policies
Ships next business day
Arrives from the United States
Estimated Shipping
Shipping to
Zip or postal code