Art Deco Optical Illusion Light Pattern Vinyl - Printed heat transfer vinyl that could be used for indoor or outdoor.
All HTV patterns are available in adhesive vinyl and heavy duty paper. If you have a custom pattern in mind, let us know and we will be happy to print it!
Heat transfer vinyl (HTV)- For garments, shirts, fabric, etc. Includes FREE Transfer Paper!
Read below for heat transfer application instructions.
Suitable for cotton, polyester, acrylic and similar fibers.
Vinyls are not reusable.
Heat Transfer Vinyl Directions
1) Heat press - Cut pattern side and weed excess material. 2) Apply heat transfer tape to top of design, squeegee (included), remove backing and place on garment. 3) Heat press at 320 degrees for 15 seconds with medium to heavy pressure. 4) Peel transfer tape hot within 5 seconds.
Directions for Iron
1) Iron - Cut pattern side and weed excess material. 2) Apply heat transfer tape to the top of the design, squeegee (included), remove backing and place on garment. 3) PLACE PARCHMENT PAPER OR TEFLON SHEET on top of vinyl and tape. 4) Turn iron onto low to medium low heat. Start with 10 seconds with even downward pressure and add an additional 5 seconds as needed. Try to avoid moving the iron. 5) When the pattern of the fabric threads and the edges are attached, the vinyl is properly adhered.
Adhesive Vinyl Directions
1) Cut pattern side. 2) Clean surface thoroughly 3) Apply masking tape along top edge. This will be used to hold the sign in place while you peel off the backing. 4) Level and apply tape to the wall. 5) Lightly spray surface with soapy water. This allows the sign to have some “play” when installing. 6) Lift up the sign allowing the masking tape to be the pivot point. Peel off the backing sheet slowly. 7) Slowly lower the letters to the wall. Squeegee every inch of the sign thoroughly making sure to get any excess water out from behind the letters. Let dry for a couple minutes. 8) Slowly peel off the face paper. Squeegee down the letters as needed. If letters stick to the backing re-squeegee the entire sign and let it dry some more.
Art Deco Optical Illusion Light Pattern Printed HTV - Adhesive Vinyl - Patterned Vinyl - Printed Heat Transfer Vinyl - Printed Pattern Paper - Cricut - Silhouette
These heat transfer prints could be used for t-shirts, cricut, scrapbooking, DIY projects, silhouette machine, iron on vinyl and more. These patterns are seamless and could be made to sizes bigger if you need.