Premium quality parts are provided along with the a completely turnkey experience. Our hardware kits are installed in thousands of homes nationwide, so we know the details our customers want and need to know for their project to go smoothly. This hardware set includes all hardware, nuts, and bolts needed to install a sliding barn door.
• INCLUDES INSTALLATION VIDEO: Watch our easy Step-By-Step video to simplify the installation process. Our experienced customer service team is U.S. based and quick to respond to any questions • ONE-PIECE RAIL: One full 79" rail is included. Others discretely provide two separate connecting rails, which is structurally less strong, more difficult to install correctly, and requires a disruptive rail connector • PRODUCT VIDEO: Click the "Industrial By Design" link in blue directly above the product title at the top of this page to see installation videos, project videos, and customer video all using our barn door hardware • SUPERIOR STRENGTH: Supports 225 pounds comfortably. We take pride in delivering a top quality product with unmatched customer service • MONEY BACK GUARANTEE: 100% money back guarantee if you are not satisfied with this product
INSIDE THE KIT:
• 6-Foot 7-Inch Rail: A single rail includes six pre-drilled holes every 16" on center. Rail is constructed of solid 1/4" thick steel, finished with our highly durable powder coating. This gets baked onto the steel at 400 degrees and creates the strongest bond possible. • Rail Hardware: Five lag bolts (of the highest grade available) with washers and five rail spacers attach the rail securely to the studs, or header board, for supporting up to 225 pounds comfortably. • 2 Hangers: These hangers are built with our premium nylon wheels, which are often an expensive upgrade at other shops. We made these the standard wheel for all our kits, and have tested our finished hangers beyond 100,000 rolls. Two different sets of bolts for attaching hangers to the door are included in order to accommodate doors ranging from 1 1/4" to 1 3/4" thick. • 2 Door Stoppers: Two door stoppers slide along the rail and tighten down at any point to stop your door exactly where you want, and they’re cushioned by rubber caps for a quiet close. • Floor Guide: A T-shaped floor guide is supplied (with anchors) to prevent the door from swinging out or up against the baseboard.
We include these detailed measurements and installation tips in our step-by-step video tutorial and written instructions. In addition, our experienced U.S. based professionals, who have actually installed our kits, are quick to respond and happy to answer any questions from the planning to installation of your project.
Q: What if my studs don't line up with the pre-drilled holes in the rail?
A: Simply attach a 1" thick header board into your studs first, and then the rail can attach anywhere into the header board. Many customers prefer this look anyway. Customers have painted the header to match the wall color to blend in, or to match the door.
Q: How thick of a door will this kit work with? A: There are solutions for any thickness of door! The bolts included for attaching the hangers to the door support a thickness range of 1 1/4" to 1 3/4", but this can be easily navigated by countersinking the bolt head into the back side of the door, or by picking up 4 longer bolts from your local hardware store. The other thing affected by a thicker door is the spacing needed between the door and wall (or baseboard/doorway trim). Plug in your door depth and trim depth below:
2 3/16" - door depth - trim depth - 3/16" (recommended gap from door to trim/wall)
If your answer is 0 or greater, then you're fine. If your answer was negative, then that number is the extra spacing you need. This extra spacing is accomplished by bolting a header board to the studs, and then the rail to this header board.
Q: How much space do I need above the doorway?
A: You will need a minimum of 6" from the top of your door to the ceiling (or crown moulding, if any) for this kit to fit correctly.
Q: Can I cut this rail down to the exact size I need?
A: Absolutely! We recommend using a reciprocating saw or angle grinder.