This listing is for a single use disposable vinyl stencil ONLY. You can apply this stencil to a piece of wood that measures 11x15 inches.
With our stencils, your craft projects will turn out perfectly every time! No crafty skills required.
Simply apply one thin coat of paint onto a solid piece of pine wood as your background color. You can use acrylic or latex paints. We recommend using a matte or flat sheen paint. These paints only take 20-25 minutes to dry. It is even faster if you put it in front of a fan!
After your background color is dry, remove the backing from this stencil and apply the vinyl to the wood. Use a squeegee or credit card to firmly rub over the entire stencil with pressure to adhere it to the wood. Peel off the top layer of white transfer tape. Now you are ready to paint!
Use a small make up wedge sponge, dip it into your paint, dab it off on a paper towel, and apply thin coats of your paint to the cut out areas of the stencil. Repeat multiple thin layers of paint on your design until those areas are well covered. Once dry, peel off the vinyl stencil. It is not reuseable and will rip into pieces as you remove it. Use an Exacto knife or toothpick to lift and remove all small pieces of vinyl left behind.
Admire your beautiful work! If you want to distress and age your sign, you can sand the edges with 110 grit sandpaper. You can also sand over your design. An antique finish for your sign can be achieved by wiping on a layer of Watco Danish Finishing Oil in Dark Walnut. Wipe on with a rag and then quickly wipe off with a clean, dry rag. This will give your sign an aged vintage look.
We have several videos on our Facebook page showing the process for applying the vinyl, painting the sign, and distressing the sign. Check out our page to watch those and to see when the new DIY kits/stencils are announced. www.facebook.com/redeemeddecoridaho