Specifications: PU Composition • Pressure sensitive backing • Matte finish • 90 Microns/3.5 Mils • 45°/60° blade • Can be layered
Create Custom Designs that Glow in the Dark! EasyWeed Glow is a white polyurethane heat transfer vinyl that looks great in the daylight and glows in the dark! Glow is available in white and it cuts and weeds like our popular EasyWeed heat transfer vinyl. To get the glow effect, “charge” the material by exposing it to sunlight. The more light you give it, the more it glows in the dark! Great for crafters looking to create kids’ pillow cases with messages that shine at bedtime. EasyWeed Glow is also perfect for simple Halloween costumes and can be layered on other Siser materials for awesome looks!
EasyWeed Glow is CPSIA Certified so even little ones can get in on the glow in the dark fun!
• Set iron dial between Cotton and Linen • Cover design with Kraft paper or non-stick cover sheet • Place on flat, hard surface (ironing board not recommended) • Press iron with medium/firm pressure (do not slide iron) • Press each section of design for 10-15 seconds • If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds • Peel carrier hot or cold
Application Instructions (heat press)
• Cut in reverse • Weed excess material • Preheat garment for 2-3 seconds • Apply design at 305°F/150°C • Use light/medium pressure for 10-15 seconds • Peel carrier hot or cold