Ace Screen Supply Company is a proud, authorized distributor of Siser® EasyWeed Adhesive.
This listing is for ONE 12" X 1 Yard roll of Siser® EasyWeed Adhesive.
This adhesive can be used to apply or layer any of our printed HTV patterns and textile foil.
EasyWeed Adhesive lets you create a trendy style without breaking the bank. Compatible with cost effective screen printing foils, this adhesive is a money saver and a money maker! In addition to screen print foils, EasyWeed Adhesive is compatible with fabrics and other materials that lend themselves to adhesion. The milky colored adhesive shares benefits of EasyWeed such as a pressure sensitive carrier and low application temperature. Therefore, the standard cutting process for cuttable materials is used when working with EasyWeed Adhesive. Weeding on a dark surface will provide the best visibility.
Just like the materials in the EasyWeed Family, EasyWeed Adhesive HTV has a carrier side and a material side. The carrier side is noticeably smoother and shinier than the material side. Now you may notice the material side looks like it doesn’t have any, well, material. That’s because it’s simply a layer of mostly transparent glue. Not just any glue though, EasyWeed Adhesive HTV! EasyWeed Adhesive can not only be used with screen printing foils, it also works with fabrics and other materials that lend themselves to adhesion.
EasyWeed Adhesive can be cut on any vinyl cutter and requires the typical steps before cutting Siser heat transfer vinyl. Make sure to mirror your design and place the carrier side face down on the cutting mat. Then make sure you pin the image below so you can always find your cut settings! I always recommend a test cut before cutting a full design. How old your blade is and how used loved it is will effect your blade and cut settings, so make sure your blade produces a good cut with our suggested settings or make some adjustments.
EasyWeed Adhesive is CPSIA Certified, so it can be used for decorating children’s clothing and apparel.
Specifications: PET Composition • Pressure sensitive backing • Semi-gloss finish • 75 Microns/2.95 Mils • 45°/60° blade • Should be layered
Application instructions (home iron) • Set iron dial between Cotton and Linen • Cover design with Kraft paper or non-stick cover sheet • Place on flat, hard surface (ironing board not recommended) • Press iron with medium/firm pressure (do not slide iron) • Press each section of design for 10-15 seconds • If areas of design lift after application, replace cover sheet and re-press for 5 seconds • Peel carrier hot
Application Instructions (heat press) • Cut in reverse • Weed excess material • Preheat garment for 2-3 seconds • Apply design at 275°F/135°C • Use medium pressure for 5-10 seconds • Peel carrier hot