Kingdom Hearts Inspired Axel's Chakram | STL Files for 3D Printing There are 4 .STL files in total, compressed into a .zip file.
These are the STL files needed to 3D print Axel's Chakram's for use as cosplay costume props or as decoration. Each chakram when completed is 24 inches long from point to point across the small circles. The outer edge of the large circle is 11-5/8 inches across. The black handle crossbars in the center are 4 inches in length.
It is fairly simple, each STL file is half a part. For the inner ring there are mirror opposite parts. For the points, print out two identical parts that glue together back to back.
For the inner ring or main body of the chakram, there are two mirror opposite sides labeled "Headpiece A" and "Headpiece B". When glued together "A" and "B" make up one forth of the inner ring. Make four of the "A" parts and four of the "B" parts to complete each chakram.
Materials needed to complete chakrams: 3D printer with filament and a 7 x 7 inch print bed, Thick CA clue to bond the 3D printed half parts together, five minute epoxy for bonding the major sections together, Bondo Glazing putty and sandpaper for smoothing, primer and paint.
This is an order for STL files to 3D print unlimited parts for Axel's Chakrams, for your own personal use ONLY. Please don't give away or resell the files.