Pen mold for Gatsby, Sierra and Wall Street pen kit. These molds are cast with Liquid Diamonds and put under 42+ pounds of pressure for 24 hours to eliminate internal bubbles. The molds were then aged for 1 week. The brass tubes have been roughened and epoxied into the mold. Each end of the mold has been trimmed square to the tube.
The pen pictured in the photograph is representative of the look and style of the pen body these molds will turn to. Each mold in this series is unique and varies in blue/green color sections slightly. The pen pictured in this image is not included in the mold purchase.
NOTE: The outer walls of this mold are sacrificial to the process and will be entirely turned down during shaping. If you normally trim the outside edge corners off prior to starting to turn your pens I highly recommend that step when using these molds. DO NOT turn these molds without wearing both a full face shield and safety glasses. The listed price is for one mold.
When the final shape is obtained apply 2 quick coats of thin CA followed by 2 of medium CA before you start your polishing regiment. This will add a bit of hardness to the surface and segments.